IEC TS 62738:2018 ed1.0 (2018-08)

Soveltamisala

IEC TS 62738:2018(E) sets out general guidelines and recommendations for the design and installation of ground-mounted photovoltaic (PV) power plants. A PV power plant is defined within this document as a grid-connected, ground-mounted system comprising multiple PV arrays and interconnected directly to a utility’s medium voltage or high voltage grid. Additional criteria is that PV power plants are restricted from access by non-qualified persons and are continuously monitored for safety and protection, either by on-site personnel or by active remote monitoring. Technical areas addressed are those that largely distinguish PV power plants from smaller, more conventional installations, including ground mounted array configurations, cable routing methods, cable selection, overcurrent protection strategies, equipotential bonding over large geographical areas, and equipment considerations. Safety and design requirements are referenced to the applicable requirements of IEC 62548 to address distinct differences relative to the design requirements for residential, commercial and other non-power plant applications.

Tuoteryhmä(t)

27.160 Solar energy engineering »

Sidokset

Velvoittavat viittaukset

EN 50539-11 Low-voltage surge protective devices – Surge protective devices for specific application including d.c. – Part 11: Requirements and tests for SPDs in photovoltaic applications
IEC 60076-1 Power transformers – Part 1: General
IEC 60076-2 Power transformers – Part 2: Temperature rise for liquid-immersed transformers

EN 50539-11 Low-voltage surge protective devices – Surge protective devices for specific application including d.c. – Part 11: Requirements and tests for SPDs in photovoltaic applications
IEC 60076-1 Power transformers – Part 1: General
IEC 60076-2 Power transformers – Part 2: Temperature rise for liquid-immersed transformers
IEC 60076-3 Power transformers – Part 3: Insulation levels, dielectric tests and external clearances in air
IEC 60076-4 Power transformers – Part 4: Guide to the lightning impulse and switching impulse testing – Power transformers and reactors
IEC 60076-5 Power transformers – Part 5: Ability to withstand short-circuit
IEC 60076-7 Power transformers – Part 7: Loading guide for mineral-oil-immersed power transformers
IEC 60085 Electrical insulation – Thermal evaluation and designation
IEC 60137 Insulated bushings for alternating voltages above 1000 V
IEC 60183 Guidance for the selection of high-voltage A.C. cable systems
IEC 60228 Conductors of insulated cables
IEC 60255-21-3 Electrical relays – Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment – Section 3: Seismic tests
IEC 60296 Fluids for electrotechnical applications – Unused mineral insulating oils for transformers and switchgear
IEC 60364-5-52 Low-voltage electrical installations – Part 5-52: Selection and erection of electrical equipment – Wiring systems
IEC 60364-5-54 Low-voltage electrical installations – Part 5-54: Selection and erection of electrical equipment – Earthing arrangements and protective conductors
IEC 60502-1 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 1: Cables for rated voltages of 1 kV ((Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
IEC 60502-2 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC 60853 (all parts) Calculation of the cyclic and emergency current rating of cables
IEC 60870-5-104 Telecontrol equipment and systems – Part 5-104: Transmission protocols – Network access for urn:iec:std:iec:60870-5-101::::IEC 60870-5-101 using standard transport profiles
IEC 60947-3:2008 Low-voltage switchgear and controlgear – Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2008/AMD1:2012
IEC 60947-3:2008/AMD2:2015
IEC 61000-4-2 Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test
IEC 61215-2 Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 2: Test procedures
IEC 61238-1 (all parts) Compression and mechanical connectors for power cables
IEC 61427-2 Secondary cells and batteries for renewable energy storage – General requirements and methods of test – Part 2: On-grid applications
IEC 61439-1 Low-voltage switchgear and controlgear assemblies – Part 1: General rules
IEC 61439-2 Low-voltage switchgear and controlgear assemblies – Part 2: Power switchgear and controlgear assemblies
IEC 61643-32 Low-voltage surge protective devices – Part 32: Surge protective devices connected to the d.c. side of photovoltaic installations – Selection and application principles
IEC 61724-1 Photovoltaic system performance – Part 1: Monitoring
IEC 61850 (all parts) Communication networks and systems for power utility automation
IEC 61936-1 Power installations exceeding 1 kV a.c. – Part 1: Common rules
IEC 62109-1 Safety of power converters for use in photovoltaic power systems – Part 1: General requirements
IEC 62109-2 Safety of power converters for use in photovoltaic power systems – Part 2: Particular requirements for inverters
IEC 62271-1 High-voltage switchgear and controlgear – Part 1: Common specifications for alternating current switchgear and controlgear
IEC 62271-100 High-voltage switchgear and controlgear – Part 100: Alternating current circuit-breakers
IEC 62271-102 High-voltage switchgear and controlgear – Part 102: Alternating current disconnectors and earthing switches
IEC 62271-103 High-voltage switchgear and controlgear – Part 103: Switches for rated voltages above 1 kV up to and including 52 kV
IEC 62271-200 High-voltage switchgear and controlgear – Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 62305-2 Protection against lightning – Part 2: Risk management
IEC 62446-1 Photovoltaic (PV) systems – Requirements for testing, documentation and maintenance – Part 1: Grid connected systems – Documentation, commissioning tests and inspection
IEC 62446-2 Photovoltaic (PV) systems – Requirements for testing, documentation and maintenance – Part 2: Grid connected systems – Maintenance of PV systems (to be published)
IEC 62548:2016 Photovoltaic (PV) arrays – Design requirements
IEC 62817 Photovoltaic systems – Design qualification of solar trackers
IEC 62852 Connectors for DC-application in photovoltaic systems – Safety requirements and tests
IEC TR 60890 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
IEC TR 62271-300 High-voltage switchgear and controlgear – Part 300: Seismic qualification of alternating current circuit-breakers
IEC TS 61724-2 Photovoltaic system performance – Part 2: Capacity evaluation method
IEC TS 61724-3 Photovoltaic system performance – Part 3: Energy evaluation method
IEC TS 62271-210 High-voltage switchgear and controlgear – Part 210: Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV

Tekninen komitea

IEC/TC 82 Solar photovoltaic energy systems »

Vahvistuspäivä

15.08.2018

Julkaisupäivä

15.08.2018

Painos

1.0

Sivumäärä

47

Julkaisun kieli

englanti