SFS-EN 1473:2021

CEN/TR 1591-2:2020 Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
CEN/TR 1591-5:2012 Flanges and their joints - Design rules for gasketed circular flange connections - Part 5: Calculation method for full face gasketed joints
EN 10204:2004 Metallic products - Types of inspection documents

CEN/TR 1591-2:2020 Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
CEN/TR 1591-5:2012 Flanges and their joints - Design rules for gasketed circular flange connections - Part 5: Calculation method for full face gasketed joints
EN 10204:2004 Metallic products - Types of inspection documents
EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
EN 1127-1:2019 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 12065:1997 Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires
EN 12162:2001+A1:2009 Liquid pumps - Safety requirements - Procedure for hydrostatic testing
EN 12483:1999 Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests
EN 13445-10:2021 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
EN 13445-1:2021 Unfired pressure vessels - Part 1: General
EN 13445-2:2021+A1:2023 Unfired pressure vessels - Part 2: Materials
EN 13445-3:2021 Unfired pressure vessels - Part 3: Design
EN 13445-4:2021+A1:2023 Unfired pressure vessels - Part 4: Fabrication
EN 13445-5:2021 Unfired pressure vessels - Part 5: Inspection and testing
EN 13445-6:2021 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
EN 13445-8:2021 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
EN 13458-1:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
EN 13458-2:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
EN 13480-1:2017 Metallic industrial piping - Part 1: General
EN 13480-1:2017/A1:2019 Metallic industrial piping - Part 1: General
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN 13480-2:2017/A1:2018 Metallic industrial piping - Part 2: Materials
EN 13480-2:2017/A2:2018 Metallic industrial piping - Part 2: Materials
EN 13480-2:2017/A3:2018 Metallic industrial piping - Part 2: Materials
EN 13480-2:2017/A7:2020 Metallic industrial piping - Part 2: Materials
EN 13480-2:2017/A8:2021 Metallic industrial piping - Part 2: Materials
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
EN 13480-3:2017/A1:2021 Metallic industrial piping - Part 3: Design and calculation
EN 13480-3:2017/A2:2020 Metallic industrial piping - Part 3: Design and calculation
EN 13480-3:2017/A3:2020 Metallic industrial piping - Part 3: Design and calculation
EN 13480-3:2017/A4:2021 Metallic industrial piping - Part 3: Design and calculation
EN 13480-3:2017/A5:2022 Metallic industrial piping - Part 3: Design and calculation
EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation
EN 13480-4:2017/A1:2023 Metallic industrial piping - Part 4: Fabrication and installation
EN 13480-4:2017/A2:2023 Metallic industrial piping - Part 4: Fabrication and installation
EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing
EN 13480-5:2017/A1:2019 Metallic industrial piping - Part 5: Inspection and testing
EN 13480-5:2017/A2:2021 Metallic industrial piping - Part 5: Inspection and testing
EN 13480-6:2017 Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13480-6:2017/A1:2019 Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
EN 13766:2018+A1:2020 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
EN 14197-1:2003 Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements
EN 14197-2:2003 Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
EN 14197-2:2003/A1:2006 Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
EN 14197-3:2004 Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements
EN 14197-3:2004/A1:2005 Cryogenic vessels - Static non vacuum insulated vessels - Part 3: Operational requirements
EN 14620-1:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General
EN 14620-1:2024 Design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -196 °C - Part 1: General
EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components
EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components
EN 14620-4:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components
EN 14620-5:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 5: Testing, drying, purging and cool-down
EN 1474-2:2020 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
EN 1514-1:1997 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
EN 1591-1:2001 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
EN 1591-1:2013 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
EN 1591-4:2013 Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
EN 1776:2015 Gas infrastructure - Gas measuring systems - Functional requirements
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-2:2024 Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-3:2003/A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4:2005/A1:2010 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-2:2003 Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges
EN 1991-2:2023 Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1992-1-1:2004 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
EN 1992-1-1:2004/A1:2014 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
EN 1992-1-1:2023 Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
EN 1992-1-2:2004 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
EN 1992-1-2:2004/A1:2019 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
EN 1992-1-2:2023 Eurocode 2 - Design of concrete structures – Part 1-2: Structural fire design
EN 1992-2:2005 Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules
EN 1992-3:2006 Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
EN 1992-4:2018 Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete
EN 1993-1-10:2005 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-11:2006 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
EN 1993-1-12:2007 Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
EN 1993-1-13:2024 Eurocode 3 - Design of steel structures - Part 1-13: Beams with large web openings
EN 1993-1-1:2022 Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-2:2005 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
EN 1993-1-2:2024 Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1993-1-3:2006 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-1-3:2024 Eurocode 3 - Design of steel structures - Part 1-3: Cold-formed members and sheeting
EN 1993-1-4:2006 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-4:2006/A1:2015 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-4:2006/A2:2020 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-5:2006 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2006/A1:2017 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2006/A2:2019 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2024 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-6:2007 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-6:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-7:2007 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
EN 1993-1-8:2005 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
EN 1993-1-8:2024 Eurocode 3 - Design of steel structures - Part 1-8: Joints
EN 1993-1-9:2005 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 1993-2:2006 Eurocode 3 - Design of steel structures - Part 2: Steel Bridges
EN 1993-3-1:2006 Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts
EN 1993-3-2:2006 Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys
EN 1993-4-1:2007 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-1:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-2:2007 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-2:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-3:2007 Eurocode 3 - Design of steel structures - Part 4-3: Pipelines
EN 1993-5:2007 Eurocode 3 - Design of steel structures - Part 5: Piling
EN 1993-6:2007 Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures
EN 1994-1-1:2004 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
EN 1994-1-2:2005 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
EN 1997-1:2004 Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-2:2007 Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
EN 1998-1:2004 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
EN 1998-1:2004/A1:2013 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
EN 1998-2:2005 Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005/A1:2009 Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005/A2:2011 Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-3:2005 Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings
EN 1998-4:2006 Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines
EN 1998-5:2004 Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining structures and geotechnical aspects
EN 1998-6:2005 Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys
EN 60079-10-2:2015 Räjähdysvaaralliset tilat. Osa 10-2: Tilaluokitus. Pölyräjähdysvaaralliset tilat
EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
EN 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
EN 60079-14:2014 Räjähdysvaaralliset tilat. Osa 14: Sähköasennusten suunnittelu, laitevalinta ja asentaminen
EN 60079-17:2014 Räjähdysvaaralliset tilat. Osa 17: Sähköasennusten tarkastus ja kunnossapito
EN 60079-18:2015 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 60079-2:2014 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
EN 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
EN 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
EN 60079-7:2015 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 60204-1:2018 Koneturvallisuus. Koneiden sähkölaitteisto. Osa 1: Yleiset vaatimukset
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 61508-1:2010 Sähköisten/elektronisten/ohjelmoitavien elektronisten turvallisuuteen liittyvien järjestelmien toiminnallinen turvallisuus. Osa 1: Yleiset vaatimukset
EN 61508-2:2010 Sähköisten/elektronisten/ohjelmoitavien elektronisten turvallisuuteen liittyvien järjestelmien toiminnallinen turvallisuus. Osa 2: Vaatimukset sähköisille/elektronisille/ohjelmoitaville elektronisille turvallisuuteen liittyville järjestelmille
EN 61508-3:2010 Sähköisten/elektronisten/ohjelmoitavien elektronisten turvallisuuteen liittyvien järjestelmien toiminnallinen turvallisuus. Osa 3: Ohjelmistovaatimukset
EN 61508-4:2010 Sähköisten/elektronisten/ohjelmoitavien elektronisten turvallisuuteen liittyvien järjestelmien toiminnallinen turvallisuus. Osa 4: Määritelmät ja lyhenteet
EN 61508-5:2010 Sähköisten/elektronisten/ohjelmoitavien elektronisten turvallisuuteen liittyvien järjestelmien toiminnallinen turvallisuus. Osa 5: Esimerkkejä menetelmistä turvallisuuden eheyden tasojen määrittämiseksi
EN 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
EN 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
EN 61800-4:2003 Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV
EN 61800-5-1:2007 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
EN 61800-5-1:2007/A11:2021 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
EN 61800-5-1:2007/A1:2017 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
EN 61800-5-2:2017 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
EN 61800-7-1:2016 Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition
EN 61800-7-201:2016 Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
EN 61800-7-202:2016 Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification
EN 61800-7-203:2016 Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification
EN 61800-7-204:2016 Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification
EN 61800-7-301:2016 Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies
EN 61800-7-302:2016 Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies
EN 61800-7-303:2016 Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies
EN 61800-7-304:2016 Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies
EN 61800-9-1:2017 Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM)
EN 61800-9-2:2017 Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters
EN 62305-1:2011 Protection against lightning - Part 1: General principles
EN 62305-2:2012 Protection against lightning - Part 2: Risk management
EN 62305-3:2011 Protection against lightning - Part 3: Physical damage to structures and life hazard
EN 62305-4:2011 Protection against lightning - Part 4: Electrical and electronic systems within structures
EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements
EN IEC 60079-0:2018 Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleiset vaatimukset
EN IEC 60079-10-1:2021 Räjähdysvaaralliset tilat. Osa 10-1: Tilaluokitus. Kaasuräjähdysvaaralliset tilat
EN IEC 60079-15:2019 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN IEC 60079-17:2024 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN IEC 60079-19:2019 Räjähdysvaaralliset tilat. Osa 19: Laitteiden korjaus, huolto ja paikkaus
EN IEC 60079-25:2022 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
EN IEC 61800-1:2021 Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed DC power drive systems
EN IEC 61800-2:2021 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for adjustable speed AC power drive systems
EN IEC 61800-3:2018 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
EN IEC 61800-3:2023 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools
EN IEC 61800-5-1:2023 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
EN IEC 61800-5-3:2023 Adjustable speed electrical power drive systems - Part 5-3: Safety requirements - Functional, electrical and environmental requirements for encoders
EN ISO 10380:2012 Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012)
EN ISO 10497:2022 Testing of valves - Fire type-testing requirements (ISO 10497:2022)
EN ISO 10715:2022 Natural gas - Gas sampling (ISO 10715:2022)
EN ISO 10723:2012 Natural gas - Performance evaluation for analytical systems (ISO 10723:2012)
EN ISO 12241:2022 Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2022, Corrected version 2022-11)
EN ISO 12944-1:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017)
EN ISO 12944-2:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:2017)
EN ISO 12944-3:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:2017)
EN ISO 12944-4:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017)
EN ISO 12944-5:2019 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019)
EN ISO 12944-6:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018)
EN ISO 12944-7:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:2017)
EN ISO 12944-8:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017)
EN ISO 12944-9:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 1460:2020 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:2020)
EN ISO 1461:2022 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2022)
EN ISO 15607:2019 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019)
EN ISO 15609-1:2019 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
EN ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01)
EN ISO 16903:2015 Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection (ISO 16903:2015)
EN ISO 16904:2016 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
EN ISO 17636-1:2022 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2022)
EN ISO 17636-2:2022 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2022, Corrected version 2023-02)
EN ISO 17637:2016 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
EN ISO 20519:2022 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2021)
EN ISO 21009-2:2015 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements (ISO 21009-2:2015)
EN ISO 21012:2018 Cryogenic vessels - Hoses (ISO 21012:2018)
EN ISO 28460:2010 Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010)
EN ISO 28921-1:2022 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)
EN ISO 28921-2:2017 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
EN ISO 3452-1:2021 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2021)
EN ISO 6974-1:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012)
EN ISO 6974-2:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012)
EN ISO 6974-3:2018 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 3: Precision and bias (ISO 6974-3:2018)
EN ISO 6974-4:2001 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000)
EN ISO 6974-5:2014 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014)
EN ISO 6974-6:2005 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002)
EN ISO 6976:2016 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN ISO 9712:2022 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2021)
EN ISO 9906:2012 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012)
EN ISO/IEC 80079-20-1:2019 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data (ISO/IEC 80079-20-1:2017, including Cor 1:2018)
IEC 60364-1 Corrigendum 1:2009
IEC 60364-1:1970
IEC 60364-2:1970
IEC 60364-3 AMD 2:1995
IEC 60364-3:1977
IEC 60364-3A:1979
IEC 60364-3B:1980
IEC 60364-4-41 AMD 1:2017
IEC 60364-4-41 Edition 5.1 Corrigendum 1:2018
IEC 60364-4-41 Edition 5.1:2017
IEC 60364-4-41:2005 Corrigendum 1 - Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60364-4-42 AMD 1:2014
IEC 60364-4-42 Edition 3.1:2014
IEC 60364-4-42:2010 Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects
IEC 60364-4-43 Corrigendum 1:2008
IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
IEC 60364-4-44 AMD 1 Corrigendum 1:2016
IEC 60364-4-44 AMD 1:2015
IEC 60364-4-44 AMD 2:2018
IEC 60364-4-44 Corrigendum 1:2010
IEC 60364-4-44 Corrigendum 2:2011
IEC 60364-4-44 Edition 2.1:2015
IEC 60364-4-44 Edition 2.2:2018
IEC 60364-4-442 AMD 1:1995
IEC 60364-4-442 AMD 2:1999
IEC 60364-4-442 Edition 1.2:1999
IEC 60364-4-442:1993 Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 442: Protection of low-voltage installations against temporary overvoltages and faults between high-voltage systems and earth
IEC 60364-4-443 AMD 1:1998
IEC 60364-4-443 Edition 2.1:1999
IEC 60364-4-443:1990
IEC 60364-4-444:1996 Electrical installations of buildings - Part 4: Protection for safety - Section 444: Protection against electromagnetic interferences (EMI) in installations of buildings
IEC 60364-4-44:2007 Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
IEC 60364-4-45:1984 Electrical installations of buildings. Part 4: Protection for safety. Chapter 45: Protection against undervoltage
IEC 60364-4-46:1981 Electrical installations of buildings. Part 4: Protection for safety. Chapter 46: Isolation and switching
IEC 60364-4-47 AMD 1:1993
IEC 60364-4-473 AMD 1:1998
IEC 60364-4-473 Edition 1.1:1999
IEC 60364-4-473:1977 Electrical installations of buildings. Part 4: Protection for safety. Chapter 47: Application of protective measures for safety. Section 473: Measures of protection against overcurrent
IEC 60364-4-47:1981 Electrical installations of buildings. Part 4: Protection for safety. Chapter 47: Application of protective measures for safety. Section 470: General. Section 471: Measures of protection against electric shock
IEC 60364-4-481:1993
IEC 60364-4-482:1982 Electrical installations of buildings. Part 4: Protection for safety. Chapter 48: Choice of protective measures as a function of external influences. Section 482: Protection against fire
IEC 60364-4:1984
IEC 60364-5-51:2005 Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
IEC 60364-5-52 Corrigendum 1:2011
IEC 60364-5-523:1999 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 523: Current-carrying capacities in wiring systems
IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
IEC 60364-5-53 AMD 1:2020
IEC 60364-5-53 Edition 4.1:2020
IEC 60364-5-534:1997
IEC 60364-5-537 AMD 1:1989
IEC 60364-5-537:1981 Electrical installations of buildings. Part 5: Selection and erection of electrical equipment. Chapter 53: Switchgear and controlgear. Section 537: Devices for isolation and switching
IEC 60364-5-53:2019 Low-Voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring
IEC 60364-5-54 AMD 1:2021
IEC 60364-5-54 Edition 3.1:2021
IEC 60364-5-548 AMD 1:1998
IEC 60364-5-548 Edition 1.1:1999
IEC 60364-5-548:1996
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
IEC 60364-5-55 AMD 1:2012
IEC 60364-5-55 AMD 2:2016
IEC 60364-5-55 Edition 2.1:2012
IEC 60364-5-55 Edition 2.2:2016
IEC 60364-5-551:1994 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Chapter 55: Other equipment - Section 551: Low-voltage generating sets
IEC 60364-5-559:1999 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Chapter 55: Other equipment - Section 559: Luminaires and lighting installations
IEC 60364-5-55:2011 Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment
IEC 60364-5-56:2018 Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services
IEC 60364-6 Corrigendum 1:2017
IEC 60364-6-61:2001
IEC 60364-6:2016 Low voltage electrical installations - Part 6: Verification
IEC 60364-7-701:2019 Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower
IEC 60364-7-702:2010 Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains
IEC 60364-7-703:2004 Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters
IEC 60364-7-704:2017 Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations
IEC 60364-7-705:2006 Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises
IEC 60364-7-706 AMD 1:2019
IEC 60364-7-706 Edition 2.1:2019
IEC 60364-7-706:2005 Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement
IEC 60364-7-707:1984
IEC 60364-7-708:2017 Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
IEC 60364-7-709 AMD 1:2012
IEC 60364-7-709 Edition 2.1:2012
IEC 60364-7-709:2007 Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations
IEC 60364-7-710:2002 Electrical installations of buildings - Part 7-710: Requirements for special installations or locations - Medical locations
IEC 60364-7-711:2018 Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands
IEC 60364-7-712:2017
IEC 60364-7-713:2013 Low-voltage electrical installations - Part 7-713: Requirements for special installations or locations - Furniture
IEC 60364-7-714:2011 Low-voltage electrical installations - Part 7-714: Requirements for special installations or locations - External lighting installations
IEC 60364-7-715:2011 Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations
IEC 60364-7-717:2009 Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units
IEC 60364-7-718:2011 Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces
IEC 60364-7-721:2017 Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans
IEC 60364-7-722:2018 Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles
IEC 60364-7-729:2007 Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways
IEC 60364-7-740:2000 Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
IEC 60364-7-753:2014 Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems
IEC 60364-8-1 Corrigendum 1:2019
IEC 60364-8-1:2019 Low-voltage electrical installations - Part 8-1: Functional aspects - Energy efficiency
IEC 60364-8-2:2018 Low-voltage electrical installations - Part 8-2: Prosumer's low-voltage electrical installations
IEC 61511-1 AMD 1:2017
IEC 61511-1 Corrigendum 1:2016
IEC 61511-1 Edition 2.1:2017
IEC 61511-1:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
IEC 61511-2:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016
IEC 61511-3:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
ISO 6578:2017 Refrigerated hydrocarbon liquids — Static measurement — Calculation procedure