SFS-EN 12972:2018

Soveltamisala

Tässä asiakirjassa määritellään vaarallisten aineiden kuljetuksessa käytettävien kiinteiden säiliöiden
(säiliöajoneuvojen), irrotettavien säiliöiden, säiliövaunujen, UN-säiliöiden ja säiliökonttien metallisten säiliöiden tyyppihyväksyntää, käyttöönottotarkastusta, määräaikaistarkastusta, välitarkastusta ja ylimääräistä tarkastusta koskevat testaus-, tarkastus- ja merkintävaatimukset.
Tätä asiakirjaa ei sovelleta monisäiliöajoneuvoihin ja monisäiliövaunuhin, jotka koostuvat kaasupulloista, putkiastioista, paineastioista, pullopaketeista ja monielementtikaasusäiliöistä (MEG-konteista), riippumatta siitä, ovatko elementit astioita tai säiliöitä.

Tämän julkaisun valmistelusta Suomessa vastaa Yhteinen Toimialaliitto, www.ytl.fi.

Tuoteryhmä(t)

13.300 Vaarallisilta aineilta suojautuminen »
23.020.20 Ajoneuvoihin asennetut säiliöt »

Sidokset

Velvoittavat viittaukset

CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
EN 12663-2:2010 Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons
EN 12663-2:2010+A1:2023 Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons

CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
EN 12663-2:2010 Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons
EN 12663-2:2010+A1:2023 Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons
EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
EN 590:2013+A1:2017 Automotive fuels - Diesel - Requirements and test methods
EN 590:2022 Automotive fuels - Diesel - Requirements and test methods
EN 837-1:1996 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
EN 837-2:1997 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
EN 837-3:1996 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
EN ISO 10855-1:2018 Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018)
EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
EN ISO 14731:2019 Welding coordination - Tasks and responsibilities (ISO 14731:2019)
EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN ISO 15607:2019 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019)
EN ISO 15609-1:2019 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
EN ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01)
EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
EN ISO 17636-1:2022 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2022)
EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
EN ISO 17636-2:2022 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2022)
EN ISO 17637:2016 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
EN ISO 17638:2016 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
EN ISO 17639:2013 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003)
EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
EN ISO 17643:2015 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015)
EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015)
EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
EN ISO 3452-1:2021 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2021)
EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
EN ISO 4136:2012 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
EN ISO 4136:2022 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2022)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023)
EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
EN ISO 9015-1:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001)
EN ISO 9016:2012 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012)
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
EN ISO 9606-3:1999 Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
EN ISO 9606-4:1999 Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
EN ISO 9712:2022 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2021)
IMO MSC/Circ 860:1998
ST/SG/AC 10/1/Rev.6:2015

Tekninen komitea

CEN/TC 296 Tanks for the transport of dangerous goods »

Direktiivi

2008/68/EC Vaarallisten aineiden sisämaankuljetuksista

http://ec.europa.eu »

Vahvistuspäivä

20.07.2018

Kumouspäivä

17.05.2024

Painos

4

Sivumäärä

116

Julkaisun kieli

suomi/englanti

SFS-EN 12972:2018 Kumottu