1.1 Scope of EN 1997 1 (1) This document provides general rules for the design and verification of geotechnical structures. (2) This document is applicable for the design and verification of geotechnical structures outside the scope of EN 1997 3. NOTE In this case, additional or amended provisions can be necessary. 1.2 Assumptions (1) In addition to the assumptions given in EN 1990, the provisions of EN 1997 (all parts) assume that: — ground investigations are planned by individuals or organisations with knowledge of potential ground and groundwater conditions; — ground investigations are executed by individuals with appropriate skills and experience; — the evaluation of test results and derivation of ground properties from the ground investigation are carried out by individuals with appropriate geotechnical experience and qualifications; — the data required for design are collected, recorded, and interpreted by appropriately qualified and experienced individuals; — geotechnical structures are designed and verified by individuals with appropriate qualifications and experience in geotechnical design; — adequate continuity and communication exist between the individuals involved in data collection, design, verification and execution. (2) This document is intended to be used in conjunction with EN 1990, which establishes principles and requirements for the safety, serviceability, robustness, and durability of structures, including geotechnical structures, and other construction works. NOTE Additional or amended provisions can be necessary for assessment of existing structures, see EN 1990 2. (3) This document is intended to be used in conjunction with EN 1997 2, which gives provisions for determining ground properties from ground investigations. (4) This document is intended to be used in conjunction with EN 1997 3, which gives specific rules for the design and verification of certain types of geotechnical structures. (5) This document is intended to be used in conjunction with other Eurocodes for the design of geotechnical structures, including temporary geotechnical structures.
Tämän julkaisun valmistelusta Suomessa vastaa Väylä, puh. 0295 343000 (vaihde).
EN 12715:2020 Execution of special geotechnical work - Grouting
EN 12716:2018 Execution of special geotechnical work - Jet grouting
EN 13670:2009 Execution of concrete structures
EN 12715:2020 Execution of special geotechnical work - Grouting
EN 12716:2018 Execution of special geotechnical work - Jet grouting
EN 13670:2009 Execution of concrete structures
EN 14199:2015 Execution of special geotechnical works - Micropiles
EN 14475:2006 Execution of special geotechnical works - Reinforced fill
EN 14487-1:2022 Sprayed concrete - Part 1: Definitions, specifications and conformity
EN 14487-2:2006 Sprayed concrete - Part 2: Execution
EN 14490:2010 Execution of special geotechnical works - Soil nailing
EN 15237:2007 Execution of special geotechnical works - Vertical drainage
EN 1537:2013 Execution of special geotechnical works - Ground anchors
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1990:2023/prA1 Eurocode - Basis of structural and geotechnical design - Part 1: New structures
EN 1991-2:2023 Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works
EN 1992-1-1:2023 Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
EN 1993-1-10:2005 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-5:2007 Eurocode 3 - Design of steel structures - Part 5: Piling
EN 1995-1-1:2004 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1996-1-1:2022 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-2:2024 Eurocode 6 - Design of masonry structures - Part 1-2: Structural fire design
EN 1996-2:2024 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution
EN 1996-3:2023 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 1997-2:2024 Eurocode 7 - Geotechnical design - Part 2: Ground properties
EN 1998-1-1:2024 Eurocode 8 - Design of structures for earthquake resistance - Part 1-1: General rules and seismic action
EN 206:2013+A2:2021 Concrete - Specification, performance, production and conformity
EN ISO 14688-1:2018 Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2017)
EN ISO 14688-2:2018 Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2017)
FprEN 1991-1-1 Eurocode 1 - Actions on structures - Part 1-1: Specific weight of materials, self-weight of construction works and imposed loads for buildings
FprEN 1997-3 Eurocode 7 - Geotechnical design - Part 3: Geotechnical structures