Unfired pressure vessels. Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
This European Standard specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less than 100 bar and shell wall thicknesses not exceeding 60 mm, which are constructed of ferritic or austenitic spheroidal graphite cast iron. The thickness limitation of the shell does not apply to thickness of flanges, reinforcements, bosses etc. The allowable grades do not include lamellar graphite cast iron grades for ferritic and austenitic grades, which are explicitly excluded from this European Standard because of low elongation and brittle material behaviour, which requires the use of different safety factors and a different approach. NOTE 1 Austenitic spheroidal graphite cast iron grades are principally used for high and low temperature applications and for their corrosion resistance properties. NOTE 2 The allowable grades of spheroidal graphite cast iron are listed in Tables 3 and Tables 4. Service conditions are given in Clause 4.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
EN 1011-8:2004 Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons
EN 12680-3:2011 Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
EN 12681:2003 Founding - Radiographic examination
EN 1011-8:2004 Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons
EN 12680-3:2011 Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
EN 12681:2003 Founding - Radiographic examination
EN 13445-1:2014 Unfired pressure vessels - Part 1: General
EN 13445-3:2014 Unfired pressure vessels - Part 3: Design
EN 13445-5:2014 Unfired pressure vessels - Part 5: Inspection and testing
EN 1369:2012 Founding - Magnetic particle testing
EN 1370:2011 Founding - Examination of surface condition
EN 1371-1:2011 Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
EN 13835:2012 Founding - Austenitic cast irons
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN 1559-3:2011 Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
EN 1563:1997/A1:2002 Founding - Spheroidal graphite cast irons
EN 1563:1997/A2:2005 Founding - Spheroidal graphite cast irons
EN 1563:2011 Founding - Spheroidal graphite cast irons
EN 287-6:2010 Qualification test of welders - Fusion welding - Part 6: Cast iron
EN 764-2:2012 Pressure equipment - Part 2: Quantities, symbols and units
EN 764-5:2002 Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials
EN 837-1:1996 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
EN 837-3:1996 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
EN ISO 15614-3:2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008)
EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
EN ISO 945-1:2008 Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2008)