Tämä eurooppalainen standardi määrittelee kupariputkien vaatimukset, näytteenoton, testausmenetelmät ja tekniset toimitusehdot. Standardia sovelletaan saumattomille pyöreille kupariputkille, joiden ulkohalkaisija on 6…219 mm ja joita käytetään alipainejärjestelmissä sekä seuraavien sairaalakaasujen siirtoon paineessa enintään 2 000 kPa: — happi, dityppioksidi eli ilokaasu, typpi, helium, hiilidioksidi, ksenon — hengitysilma — edellä mainittujen kaasujen seokset — instrumentti-ilma — anestesiakaasut ja höyryt.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Eurooppalainen esipuhe
Johdanto
1 Soveltamisala
2 Velvoittavat viittaukset
3 Termit ja määritelmät
4 Nimikkeet
4.1 Materiaalin nimikkeet
4.2 Tila
4.3 Tuotenimike
5 Tilaustiedot
6 Vaatimukset
6.1 Kemiallinen koostumus
6.2 Mekaaniset ominaisuudet
6.3 Mitat ja toleranssit
6.4 Virheettömyys
6.5 Pinnanlaatu
6.6 Taivutus
6.7 Kartiolaajennus
7 Näytteenotto
8 Testausmenetelmät
8.1 Kemiallisen koostumuksen määrittäminen
8.2 Vetokoe
8.3 Kovuuskoe
8.4 Hiilipitoisuuskoe
8.5 Taivutuskoe
8.6 Kartiolaajennuskoe
8.7 Virheettömyys
8.8 Uusintakokeet
9 Ainestodistukset
10 Pakkaus, merkintä ja toimitusmuoto
10.1 Pakkaus ja merkintä
10.2 Toimitusmuoto
Liite A Merkinnän kestävyyskoe (velvoittava)
Liite B Virheettömyys (velvoittava)
Liite ZA Tämän eurooppalaisen standardin suhde EU:n direktiivin 2014/68/EU olennaisiin vaatimuksiin (opastava)
EN 10204:2004 Metallic products - Types of inspection documents
EN 1173:2008 Copper and copper alloys - Material condition designation
EN 1971-1:2019 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
EN 10204:2004 Metallic products - Types of inspection documents
EN 1173:2008 Copper and copper alloys - Material condition designation
EN 1971-1:2019 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
EN 1971-2:2019 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
EN 723:2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
EN ISO 6507-1:2018 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018)
EN ISO 6507-1:2023 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2023)
EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
ISO 1553:1976 Unalloyed copper containing not less than 99,90 % of copper -- Determination of copper content -- Electrolytic method
ISO 4741:1984 Copper and copper alloys -- Determination of phosphorus content -- Molybdovanadate spectrometric method