SFS-EN 12068:1998:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This standard specifies the functional requirements and test methods for external organic coatings based on tapes or shrinkable materials to be used for corrosion protection of buried and immersed steel pipelines in conjunction with cathodic protection. It classifies coatings by increasing mechanical resistance and operating temperatures. Coatings for special installation conditions are also considered. A comprehensive classification of coatings in relation to functional requirements is defined.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

23.040.99 Muut putkistojen osat »
25.220.60 Orgaaniset pinnoitteet »

Sidokset

Velvoittavat viittaukset

EN 1427:2015 Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method
EN ISO 527-3:1995 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995)
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)

EN 1427:2015 Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method
EN ISO 527-3:1995 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995)
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 1523:1983 Paints, varnishes, petroleum and related products -- Determination of flashpoint -- Closed cup equilibrium method
ISO 188:1998 Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests
ISO 2808:1997 Paints and varnishes -- Determination of film thickness
ISO 2811:1974 Paints and varnishes -- Determination of density
ISO 3251:1993 Paints and varnishes -- Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes
ISO 3303:1990 Rubber- or plastics-coated fabrics -- Determination of bursting strength
ISO 3801:1977 Textiles -- Woven fabrics -- Determination of mass per unit length and mass per unit area
ISO 4591:1992 Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 4593:1993 Plastics -- Film and sheeting -- Determination of thickness by mechanical scanning
ISO 4626:1980 Volatile organic liquids -- Determination of boiling range of organic solvents used as raw materials
ISO 4892-1:1994 Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance
ISO 4892-2:1994 Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc sources
ISO 5893:1993 Rubber and plastics test equipment -- Tensile, flexural and compression types (constant rate of traverse) -- Description
ISO 7254:1984 Paints and varnishes -- Assessment of natural spreading rate -- Brush application
ISO 8501-1:1988 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

Tekninen komitea

CEN/TC 219 Cathodic protection »

Vahvistuspäivä

02.11.1998

Julkaisupäivä

18.04.2017

Painos

1

Sivumäärä

48

Julkaisun kieli

englanti