This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation. This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure. This European Standard is not applicable to: - Pipelines and their accessories; - Stream waterways such as penstocks, pressure tunnels, pressure shaft for hydro-electric-installations and their related specific accessories; - Piping for vehicles covered by the EEC type approval procedures as laid down in Directives 70/156/EEC [1], 74/150/EEC [2] and 92/61/EEC [3]; - Items specifically designed for nuclear use, failure of which may cause an emission of radioactivity; - Well-control equipment used in the petroleum, gas or geothermal exploration and extraction industry and in underground storage which is intended to contain and/or control well pressure, including the piping; - Piping of blast furnaces including the furnace cooling, hot blast recuperators, dust extractors and blast furnace exhaust gas scrubbers and direct reducing cupolas including the furnace cooling, gas converters and vacuum furnaces and pans for melting, re-melting de-gassing and casting of steel and non ferrous metals; - Enclosures for high voltage electrical equipment such as switchgear, control gear and transformers; - Pressurized pipes for the containment of transmission systems such as for electrical power and telephone cables; - Permanently fixed piping for ships, rockets, aircraft and mobile offshore units; - Internal piping in medical devices as defined in the Directive 93/142/EEC [4] concerning medical devices; - Internal piping of boilers and piping integral to pressure vessels.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
CEN/TR 13480-7:2002 Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
CEN/TR 13480-7:2002 Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation
EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing
EN 13480-6:2017 Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
EN 764-1:2015+A1:2016 Pressure equipment - Part 1: Vocabulary
EN 764-2:2002 Pressure equipment - Part 2: Quantities, symbols and units
EN 764-7:2002 Pressure equipment - Part 7: Safety systems for unfired pressure equipment
EN ISO 4126-10:2024 Safety devices for protection against excessive pressure - Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow (ISO 4126-10:2024)
EN ISO 4126-1:2013 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013)
EN ISO 4126-1:2013/A1:2016 Safety devices for protection against excessive pressure - Part 1: Safety valves - Amendment 1 (ISO 4126-1:2013/Amd 1:2016)
EN ISO 4126-1:2013/A2:2019 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013)
EN ISO 4126-2:2019 Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2018)
EN ISO 4126-3:2020 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020)
EN ISO 4126-4:2013 Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves (ISO 4126-4:2013)
EN ISO 4126-5:2013 Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013)
EN ISO 4126-5:2013/A1:2016 Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) - Amendment 1 (ISO 4126-5:2013/Amd 1:2016)
EN ISO 4126-6:2014 Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014)
EN ISO 4126-7:2013 Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013)
EN ISO 4126-7:2013/A1:2016 Safety devices for protection against excessive pressure - Part 7: Common data - Amendment 1 (ISO 4126-7:2013/Amd 1:2016)