Tässä eurooppalaisessa standardissa esitetään yleiset tekniset toimitusehdot painelaitteiden valmistuksessa käytettäville levytuotteille. Standardissa EN 10021 esitetyt yleiset tekniset toimitusehdot ovat myös voimassa. HUOM. Kun EU:n virallisessa lehdessä (EUVL) on julkaistu viittaus tähän eurooppalaiseen standardiin liittyen direktiiviin 2014/68/EU, olettamus siitä, että materiaalit ovat direktiivin 2014/68/EU olennaisten turvallisuusvaatimusten mukaisia, koskee ainoastaan standardissa (osa 1 ja muut osat) olevien materiaalien teknisiä tietoja eikä materiaalin oleteta soveltuvan tietynlaiseen laitteeseen. Näin ollen painelaitteen suunnittelijan tai valmistajan on arvioitava tässä materiaalistandardissa mainittuja teknisiä tietoja kyseisen laitteen rakennevaatimusten suhteen sen varmistamiseksi, että direktiivin 2014/68/EU olennaiset turvallisuusvaatimukset täyttyvät.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Eurooppalainen esipuhe
1 Soveltamisala
2 Velvoittavat viittaukset
3 Termit ja määritelmät
4 Mittatoleranssit
5 Massan laskenta
6 Luokittelu ja nimike
6.1 Luokittelu
6.2 Nimike
7 Ostajan toimittamat tiedot
7.1 Pakolliset tiedot
7.2 Optiot
7.3 Tilausesimerkit
8 Vaatimukset
8.1 Teräksen valmistusmenetelmä
8.2 Toimitustila
8.3 Kemiallinen koostumus
8.4 Mekaaniset ominaisuudet
8.5 Pinnanlaatu
8.6 Sisäinen virheettömyys
9 Tarkastus
9.1 Ainestodistukset ja niissä esitettävät tiedot
9.2 Suoritettavat kokeet
9.3 Uusintakokeet, lajittelu ja uusi tuotantokäsittely
10 Näytteenotto
10.1 Testauksen laajuus
10.2 Näytteiden ja koekappaleiden valinta ja valmistus
11 Koemenetelmät
11.1 Kemiallisen koostumuksen määrittäminen
11.2 Vetokoe huoneenlämpötilassa
11.3 Kuumavetokoe
11.4 Iskukoe
11.5 Muut kokeet
12 Merkintä
Liite A Standardiin EN 10028-1:2007+A1:2009 tehdyt muutokset (opastava)
Liite ZA Tämän eurooppalaisen standardin suhde EU:n direktiivin 2014/68/EU olennaisiin vaatimuksiin (opastava)
CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel
CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel
EN 10021:2006 General technical delivery conditions for steel products
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
EN 10028-6:2017 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10079:2007 Definition of steel products
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN 10204:2004 Metallic products - Types of inspection documents
EN 10307:2001 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008)
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN ISO 2566-2:1999 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
EN ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998)
EN ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2013, Corrected version 2015-06-01)
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN ISO 9444-2:2010 Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)
EN ISO 9445-1:2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
EN ISO 9445-2:2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)
ISO 9444-1:2009 Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths