Tässä asiakirjassa määritellään huoneenlämpötilassa käytettävien seostamattomista laatuteräksistä sähkövastushitsattujen ja jauhekaarihitsattujen pyöreiden teräsputkien tekniset toimitusehdot testausluokille TR1 ja TR2. HUOM. 1 Testausluokka TR2 on tarkoitettu tukemaan EU:n painelaitedirektiivin 2014/68/EU olennaisia vaatimuksia huoneenlämpötilaominaisuuksien osalta (ks. taulukko 5). HUOM. 2 Kun EU:n virallisessa lehdessä (EUVL) on julkaistu viittaus tähän eurooppalaisen standardiin, olettamus siitä, että materiaalit ovat direktiivin 2014/68/EU olennaisten turvallisuusvaatimusten mukaisia, koskee ainoastaan standardissa olevien materiaalien teknisiä tietoja eikä materiaalin oleteta soveltuvan tietynlaiseen painelaitteeseen. Näin ollen painelaitteen suunnittelijan tai valmistajan on arvioitava tässä materiaalistandardissa mainittuja teknisiä tietoja kyseisen laitteen rakennevaatimusten suhteen sen varmistamiseksi, että painelaitedirektiivin olennaiset turvallisuusvaatimukset täyttyvät ottaen huomioon myös myöhemmät valmistusvaiheet, jotka voivat vaikuttaa perusmateriaalien ominaisuuksiin.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Eurooppalainen esipuhe
1 Soveltamisala
2 Velvoittavat viittaukset
3 Termit ja määritelmät
4 Tunnukset
5 Luokittelu ja nimike
5.1 Luokittelu
5.2 Nimike
6 Ostajan toimittamat tiedot
6.1 Pakolliset tiedot
6.2 Optiot
6.3 Tilausesimerkki
7 Valmistusmenetelmä
7.1 Teräksen valmistusmenetelmä
7.2 Putkien valmistusmenetelmät ja toimitustilat
7.3 NDT-henkilöstöä koskevat vaatimukset
8 Vaatimukset
8.1 Yleistä
8.2 Kemiallinen koostumus
8.3 Mekaaniset ominaisuudet
8.4 Ulkonäkö ja sisäinen virheettömyys
8.5 Suoruus
8.6 Päiden viimeistely
8.7 Mitat, painot ja toleranssit
9 Tarkastus
9.1 Tarkastustavat ja ainestodistukset
9.2 Ainestodistuksen sisältämät tiedot
9.3 Yhteenveto tarkastuksesta ja testauksesta
10 Näytteenotto
10.1 Testaustaajuus
10.2 Näyte- ja koekappaleiden valmistus
11 Koemenetelmät
11.1 Kemiallisen koostumuksen määrittäminen
11.2 Putken vetokoe
11.3 Hitsin poikittainen vetokoe
11.4 Litistyskoe
11.5 Kartiolaajennuskoe
11.6 Hitsin taivutuskoe
11.7 Iskukoe
11.8 Tiiveyskoe
11.9 Mittojen tarkastus
11.10 Silmämääräinen tarkastus
11.11 Rikkomaton aineenkoetus
11.12 Uusintakokeet, lajittelu ja uusi tuotantokäsittely
12 Merkintä
12.1 Käytettävä merkintä
12.2 Lisämerkintä
13 Suojaus
Liite A Jauhekaarihitsattujen putkien hitsausmenetelmän hyväksyntä testausluokalle TR2 (velvoittava)
Liite B Edelliseen painokseen tehdyt tekniset muutokset (opastava)
Liite ZA Tämän eurooppalaisen standardin suhde direktiivin 2014/68/EU olennaisiin vaatimuksiin (opastava)
CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel
CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel
EN 10021:2006 General technical delivery conditions for steel products
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN 10204:2004 Metallic products - Types of inspection documents
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
EN 10266:2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN ISO 10893-10:2011 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)
EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
EN ISO 10893-1:2011 Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011)
EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
EN ISO 10893-3:2011 Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011)
EN ISO 10893-6:2011 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011)
EN ISO 10893-7:2011 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011)
EN ISO 14174:2012 Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 14284:2022 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:2022)
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN ISO 17639:2013 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003)
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2018)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN ISO 8492:2013 Metallic materials - Tube - Flattening test (ISO 8492:2013)
EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
ISO 11484:2009 Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel