(1)P This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design. (2)P This Part 1-2 deals only with passive methods of fire protection. Active methods are not covered. (3)P This Part 1-2 applies to masonry structures which, for reasons of general fire safety, are required to fulfil certain functions when exposed to fire, in terms of: - avoiding premature collapse of the structure (load bearing function) - limiting fire spread (flames, hot gases, excessive heat) beyond designated areas (separating function) (4)P This Part 1-2 gives principles and application rules for designing structures for specified requirements in respect of the aforementioned functions and levels of performance. (5)P This Part 1-2 applies to structures, or parts of structures, that are within the scope of EN 1996-1-1, EN 1996-2 and EN 1996-3 and are designed accordingly. (6)P This Part 1-2 does not cover masonry built with Natural Stone units to EN771-6 (7)P This Part 1-2 deals with the following: - non-loadbearing internal walls. - non-loadbearing external walls. - loadbearing internal walls with separating or non-separating functions. - loadbearing external walls with separating or non-separating functions.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 13279-1:2008 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
EN 1363-1:2020 Fire resistance tests - Part 1: General requirements
EN 1363-2:1999 Fire resistance tests - Part 2: Alternative and additional procedures
EN 13279-1:2008 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
EN 1363-1:2020 Fire resistance tests - Part 1: General requirements
EN 1363-2:1999 Fire resistance tests - Part 2: Alternative and additional procedures
EN 1364-1:2015 Fire resistance tests for non-loadbearing elements - Part 1: Walls
EN 1365-1:2012 Fire resistance tests for loadbearing elements - Part 1: Walls
EN 1365-4:1999 Fire resistance tests for loadbearing elements - Part 4: Columns
EN 1366-3:2009 Fire resistance tests for service installations - Part 3: Penetration seals
EN 1366-3:2021 Fire resistance tests for service installations - Part 3: Penetration seals
EN 1990:2002 Eurocode - Basis of structural design
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-2:2024 Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-1:2022 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-2:2006 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
EN 1996-3:2006 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 1996-3:2023 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 771-1:2011+A1:2015 Specification for masonry units - Part 1: Clay masonry units
EN 771-2:2011+A1:2015 Specification for masonry units - Part 2: Calcium silicate masonry units
EN 771-3:2011+A1:2015 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN 771-4:2011+A1:2015 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
EN 771-5:2011+A1:2015 Specification for masonry units - Part 5: Manufactured stone masonry units
EN 771-6:2011+A1:2015 Specification for masonry units - Part 6: Natural stone masonry units
EN 772-13:2000 Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone)
EN 998-1:2016 Specification for mortar for masonry - Part 1: Rendering and plastering mortar
EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar
prEN 12602 Prefabricated reinforced components of autoclaved aerated concrete
Tämä on nk. ensimmäisen sukupolven eurokoodi, joka on edelleen käytössä Suomessa, kunnes toisen sukupolven eurokoodit otetaan käyttöön. Lisätietoja eurokoodeista www.eurocodes.fi.