(1)P EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design.
(2) EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resis¬tance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered.
(3) EN 1999 is intended to be used in conjunction with: - EN 1990 "Basis of structural design" - EN 1991 "Actions on structures" - European Standards construction products relevant for aluminium structures - EN 1090-1: Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components - EN 1090-3: Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
(4) EN 1999 is subdivided in five parts: EN 1999-1-1 Design of Aluminium Structures: General structural rules. EN 1999-1-2 Design of Aluminium Structures: Structural fire design. EN 1999-1-3 Design of Aluminium Structures: Structures susceptible to fatigue. EN 1999-1-4 Design of Aluminium Structures: Cold-formed structural sheeting. EN 1999-1-5 Design of Aluminium Structures: Shell structures.
1.1.2 Scope of EN 1999-1-4
(1)P EN 1999-1-4 gives design requirements for cold-formed trapezoidal aluminium sheeting. It applies to cold-formed aluminium products made from hot rolled or cold rolled sheet or strip that have been cold-formed by such processes as cold-rolled forming or press-breaking. The execution of aluminium structures made of cold-formed sheeting is covered in EN 1090-3.
NOTE The rules in this part complement the rules in other parts of EN 1999-1.
(2) (...)
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1090-3:2019 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 1396:2007 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1090-3:2019 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 1396:2007 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN 1990:2002 Eurocode - Basis of structural design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-3:2003/A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4:2005/A1:2010 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-2:2003 Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1995-1-1:2004 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1999-1-1:2007 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 485-2:2008 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
EN 508-2:2019 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
EN ISO 12944-2:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:2017)
EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)
EN ISO 1481:2011 Slotted pan head tapping screws (ISO 1481:2011)
EN ISO 15480:2019 Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
EN ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
EN ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)
EN ISO 15974:2000 Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)
EN ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
EN ISO 15978:2002 Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
EN ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)
EN ISO 15982:2002 Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)
EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
ISO 7049:1983 Cross recessed pan head tapping screws
Tätä versiota standardista voidaan käyttää 2028-03-30 saakka.
Tämä on nk. ensimmäisen sukupolven eurokoodi, joka on edelleen käytössä Suomessa, kunnes toisen sukupolven eurokoodit otetaan käyttöön. Lisätietoja eurokoodeista www.eurocodes.fi.