Kuljetinlaitteet ja -järjestelmät. Turvallisuusvaatimukset ja sähkömagneettista yhteensopivuutta koskevat vaatimukset. Massatavaran kuljetuksessa käytettävät kiinteät hihnakuljettimet
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
1.1 Tämä eurooppalainen standardi sisältää tekniset vaatimukset kohdassa 4 lueteltujen vaaratekijöiden vaikutusten minimoimiseksi. Nämä vaaratekijät voivat esiintyä kohdissa 3.1…3.2.4 määriteltyjen kiinteiden hihnakuljettimien ja -kuljetinjärjestelmien käytön ja kunnossapidon yhteydessä, kun kuljettimet on tarkoitettu siirtämään massatavaraa jatkuvatoimisesti kuormauspaikasta/-paikoista purkauspaikkaan/-paikkoihin. Standardi kattaa myös sähkömagneettista yhteensopivuutta koskevat vaatimukset.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
CLC/TR 50404:2003 Electrostatics - Code of practice for the avoidance of hazards due to static electricity
EN 1005-1:2001 Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
CLC/TR 50404:2003 Electrostatics - Code of practice for the avoidance of hazards due to static electricity
EN 1005-1:2001 Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
EN 1005-3:2002 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
EN 1037:1995 Safety of machinery - Prevention of unexpected start-up
EN 1050:1996 Safety of machinery - Principles for risk assessment
EN 1070:1998 Safety of machinery - Terminology
EN 1088:1995 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 1127-1:1997 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 12150-1:2000 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 13202:2000 Ergonomics of the thermal environment - Temperatures of touchable hot surfaces - Guidance for establishing surface temperature limit values in production standards with the aid of EN 563
EN 1760-2:2001 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN 294:1992 Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs
EN 349:1993 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 418:1992 Safety of machinery - Emergency stop equipment, functional aspects - Principles for design
EN 457:1992 Safety of machinery - Auditory danger signals - General requirements, design and testing (ISO 7731:1986, modified)
EN 50081-1:1992 Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry
EN 563:1994 Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces
EN 574:1996 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
EN 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
EN 60204-1:1997 Koneturvallisuus. Koneiden sähkölaitteisto. Osa 1: Yleiset vaatimukset
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 60947-5-1:1997 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
EN 61000-6-2:1999 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
EN 61310-1:1995 Koneturvallisuus. Merkinantaminen, merkitseminen ja vaikuttaminen. Osa 1: Näköön, kuuloon ja tuntoon perustuvia signaaleja koskevat vaatimukset
EN 614-1:1995 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 61496-1:1997 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
EN 741:2000+A1:2010 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
EN 811:1996 Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
EN 842:1996 Safety of machinery - Visual danger signals - General requirements, design and testing
EN 953:1997 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 954-1:1996 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003)
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN ISO 12543-3:1998 Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:1998)
EN ISO 14122-1:2001 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001)
EN ISO 14122-2:2001 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001)
EN ISO 14122-3:2001 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001)
EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
IEC 61241-1-1:1999
ISO 2148:1974 Continuous handling equipment -- Nomenclature
ISO 6184-1:1985 Explosion protection systems -- Part 1: Determination of explosion indices of combustible dusts in air