SFS-EN 806-5:2012

Soveltamisala

Tässä eurooppalaisessa standardissa määritetään vaatimukset ja annetaan suosituksia standardin EN 806‑1 mukaisesti rakennuksen sisäisten, tai tietyissä tapauksissa rakennusten ulkopuolisten mutta kiinteistön alueella sijaitsevien talousvesilaitteistojen toimintaan ja kunnossapitoon.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Sisällysluettelo

Tuoteryhmä(t)

91.140.60 Vedenjakelu »

Sidokset

Velvoittavat viittaukset

EN 12729:2002 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
EN 12729:2023 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
EN 12897:2016+A1:2020 Water supply - Specification for indirectly heated unvented (closed) storage water heaters

EN 12729:2002 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
EN 12729:2023 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
EN 12897:2016+A1:2020 Water supply - Specification for indirectly heated unvented (closed) storage water heaters
EN 13076:2003 Devices to prevent pollution by backflow of potable water - Unrestricted air gap-Family A - Type A
EN 13077:2018 Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B
EN 13077:2023 Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B
EN 13078:2003 Devices to prevent pollution by backflow of potable water - Air gap with submerged feed incorporating air inlet plus overflow - Family A, type C
EN 13079:2003 Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D
EN 13433:2006 Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
EN 13433:2021 Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
EN 13434:2006 Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B
EN 13434:2021 Devices to prevent pollution by backflow of potable water - Mechanical disconnector, flow actuated - Family G, Type B
EN 13443-1:2002+A1:2007 Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
EN 13443-2:2005+A1:2007 Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing
EN 13959:2004 Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D
EN 14095:2003 Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance, safety and testing
EN 14367:2005 Non controllable backflow preventer with different pressure zones - Family C, type A
EN 14451:2020 Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 10 to DN 50 inclusive - Family D, type A
EN 14452:2005 Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B
EN 14453:2005 Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C
EN 14454:2005 Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A
EN 14455:2005 Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B
EN 14506:2005 Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
EN 14622:2005 Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F
EN 14623:2005 Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G
EN 14652:2005+A1:2007 Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing
EN 14743:2005+A1:2007 Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing
EN 14812:2005+A1:2007 Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing
EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
EN 1488:2000 Building valves - Expansion groups - Tests and requirements
EN 1488:2021 Building valves - Expansion groups - Tests and requirements
EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
EN 14898:2006+A1:2007 Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing
EN 1489:2000 Building valves - Pressure safety valves - Tests and requirements
EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 1491:2000 Building valves - Expansion valves - Tests and requirements
EN 1491:2022 Building valves - Expansion valves - Tests and requirements
EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
EN 15096:2020 Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification
EN 15161:2006 Water conditioning equipment inside buildings - Installation, operation, maintenance and repair
EN 15219:2006+A1:2007 Water conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing
EN 1567:1999 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
EN 15848:2010 Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing
EN 1717:2000 Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
EN 806-1:2000 Specifications for installations inside buildings conveying water for human consumption - Part 1: General
EN 806-2:2005 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
EN ISO 3822-1:1999 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999)
EN ISO 3822-2:1995 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
EN ISO 3822-3:2018 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018)
EN ISO 3822-4:1997 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances

Tekninen komitea

CEN/TC 164 Water supply »

Vahvistuspäivä

05.03.2012

Julkaisupäivä

05.03.2019

Painos

1

Sivumäärä

57

Julkaisun kieli

suomi/englanti