Cleanrooms and associated controlled environments. Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) (ISO 14644-7:2004)
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
ISO 14644-7:2004 specifies the minimum requirements for the design, construction, installation, test and approval of separative devices, in those respects where they differ from cleanrooms as described in ISO 14644-4 and 14644-5. The application of ISO 14644-7:2004 takes into account the following limitations: user requirements are as agreed by customer and supplier; application-specific requirements are not addressed; specific processes to be accommodated in the separative-device installation are not specified; fire, safety and other regulatory matters are not considered specifically; where appropriate, national and local regulations apply. ISO 14644-7:2004 is not applicable to full-suits.
Tämän julkaisun valmistelusta Suomessa vastaa Yhteinen Toimialaliitto, www.ytl.fi.
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Design and construction
6 Access devices
6.1 Use
6.2 Manual operation
6.3 Robotic handling
7 Transfer devices
7.1 Use
7.2 Selection
7.3 Fail-safe design
8 Siting and installing
9 Testing and approval
9.1 General
9.2 Glove breach test
9.3 Operating differential pressure
9.4 Leak testing
9.5 Periodic testing
Annex A Separation continuum concept (informative)
Annex B Air-handling systems and gas systems (informative)
Annex C Access devices (informative)
Annex D Examples of transfer devices (informative)
ISO 10648-2:1994 Containment enclosures -- Part 2: Classification according to leak tightness and associated checking methods
ISO 14644-1:1999 Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness
ISO 14644-2:2000 Cleanrooms and associated controlled environments -- Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
ISO 10648-2:1994 Containment enclosures -- Part 2: Classification according to leak tightness and associated checking methods
ISO 14644-1:1999 Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness
ISO 14644-2:2000 Cleanrooms and associated controlled environments -- Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
ISO 14644-3:2005 Cleanrooms and associated controlled environments -- Part 3: Test methods
ISO 14644-4:2001 Cleanrooms and associated controlled environments -- Part 4: Design, construction and start-up
ISO 14698-1:2003 Cleanrooms and associated controlled environments -- Biocontamination control -- Part 1: General principles and methods
ISO 14698-2:2003 Cleanrooms and associated controlled environments -- Biocontamination control -- Part 2: Evaluation and interpretation of biocontamination data