This document specifies product characteristics, test/assessment methods and how to express test/assessment results. Cast iron pipelines kits are usually composed of cast iron pipes, fittings, joints and accessories. This document covers the range of nominal diameter from DN 40 to DN 600 inclusive. The cast iron includes grey cast iron and ductile cast iron. The roof gullies used for siphonic systems are outside the scope of this document. Sewerage applications are outside the scope of this document. It is intended to be used for the construction of gravity or vacuum discharge pressurized or unpressurised networks installed inside and/or outside works, above and/or below ground and in construction works.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
EN 10088-1:2023 Stainless steels - Part 1: List of stainless steels
EN 10204:2004 Metallic products - Types of inspection documents
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
EN 10088-1:2023 Stainless steels - Part 1: List of stainless steels
EN 10204:2004 Metallic products - Types of inspection documents
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13823:2020 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 13823:2020+A1:2022 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
EN 681-1:1996 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
EN ISO 11925-2:2020 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2020)
EN ISO 1514:2016 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
EN ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018)
EN ISO 2409:2020 Paints and varnishes - Cross-cut test (ISO 2409:2020)
EN ISO 2808:2019 Paints and varnishes - Determination of film thickness (ISO 2808:2019)
EN ISO 2812-1:2017 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)
EN ISO 3506-1:2020 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)
EN ISO 3506-2:2020 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)
EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
EN ISO 898-2:2022 Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN ISO 9227:2022 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2022)
EN ISO/CIE 11664-4:2019 Colorimetry - Part 4: CIE 1976 L*a*b* colour space (ISO/CIE 11664-4:2019)
ISO 1817:2015 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
ISO 185:2020 Grey cast irons — Classification