This European Standard specifies the requirements for factory made products of expanded cork, which are used for the thermal insulation of buildings. The products are made with granulated cork agglomerated without additional binders and are delivered as boards with or without facings or coatings. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 m2?K/W, or a declared thermal conductivity greater than 0,060 W/(m?K), at 10 °C, are not covered by this European Standard.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 12086:2013 Thermal insulating products for building applications - Determination of water vapour transmission properties
EN 12089:2013 Thermal insulating products for building applications - Determination of bending behaviour
EN 12090:2013 Thermal insulating products for building applications - Determination of shear behaviour
EN 12086:2013 Thermal insulating products for building applications - Determination of water vapour transmission properties
EN 12089:2013 Thermal insulating products for building applications - Determination of bending behaviour
EN 12090:2013 Thermal insulating products for building applications - Determination of shear behaviour
EN 12105:1998 Resilient floor coverings - Determination of moisture content of agglomerated composition cork
EN 12430:2013 Thermal insulating products for building applications - Determination of behaviour under point load
EN 12431:2013 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 12939:2000 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13820:2003 Thermal insulating materials for building applications - Determination of organic content
EN 13823:2020 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 13823:2020+A1:2022 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 15715:2009 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
EN 1602:2013 Thermal insulating products for building applications - Determination of the apparent density
EN 1603:2013 Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)
EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN 1605:2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
EN 1606:2013 Thermal insulating products for building applications - Determination of compressive creep
EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
EN 29052-1:1992 Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
EN 822:2013 Thermal insulating products for building applications - Determination of length and width
EN 823:2013 Thermal insulating products for building applications - Determination of thickness
EN 824:2013 Thermal insulating products for building applications - Determination of squareness
EN 825:2013 Thermal insulating products for building applications - Determination of flatness
EN 826:2013 Thermal insulating products for building applications - Determination of compression behaviour
EN ISO 10456:2007 Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007)
EN ISO 11654:1997 Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997)
EN ISO 1182:2020 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2020)
EN ISO 11925-2:2020 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2020)
EN ISO 16534:2020 Thermal insulating products for building applications - Determination of compressive creep (ISO 16534:2020)
EN ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018)
EN ISO 29465:2022 Thermal insulating products for building applications - Determination of length and width (ISO 29465:2022)
EN ISO 29466:2022 Thermal insulating products for building applications - Determination of thickness (ISO 29466:2022)
EN ISO 29468:2022 Thermal insulating products for building applications - Determination of flatness (ISO 29468:2022)
EN ISO 29469:2022 Thermal insulating products for building applications - Determination of compression behaviour (ISO 29469:2022)
EN ISO 29470:2020 Thermal insulating products for building applications - Determination of the apparent density (ISO 29470:2020)
EN ISO 29767:2019 Thermal insulating products for building applications - Determination of short-term water absorption by partial immersion (ISO 29767:2019)
EN ISO 29770:2022 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO 29770:2022)
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
EN ISO 9053-1:2018 Acoustics - Determination of airflow resistance - Part 1: Static airflow method (ISO 9053-1:2018)
EN ISO 9229:2007 Thermal insulation - Vocabulary (ISO 9229:2007)
ISO 16269-6:2005 Statistical interpretation of data -- Part 6: Determination of statistical tolerance intervals