This European Standard specifies the requirements for factory made expanded polystyrene products, with or without rigid or flexible facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards or rolls or other preformed ware (flat, tapered, tongue and grooves, shiplap, profiled etc.). Products covered by this standard are also used for sound insulation and in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 m²·K/W or a declared thermal conductivity at 10 °C greater than 0,060 W/(m·K) are not covered by this standard. This standard does not cover in-situ insulation products (covered by EN 16025-1 and -2), products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14309), products intended to be used in civil engineering applications (covered by EN 14933) and products intended to be used in beam and block systems in floors (covered by EN 15037-4).
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
EN 12086:1997 Thermal insulating products for building applications - Determination of water vapour transmission properties
EN 12089:2013 Thermal insulating products for building applications - Determination of bending behaviour
EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
EN 12086:1997 Thermal insulating products for building applications - Determination of water vapour transmission properties
EN 12089:2013 Thermal insulating products for building applications - Determination of bending behaviour
EN 12090:2013 Thermal insulating products for building applications - Determination of shear behaviour
EN 12091:2013 Thermal insulating products for building applications - Determination of freeze-thaw resistance
EN 12429:1998 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
EN 12431:2013 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 12939:2000 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13793:2003 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
EN 13820:2003 Thermal insulating materials for building applications - Determination of organic content
EN 13823:2020 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 13823:2020+A1:2022 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 15715:2009 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
EN 1602:2013 Thermal insulating products for building applications - Determination of the apparent density
EN 1603:2013 Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)
EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN 1605:2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
EN 1606:2013 Thermal insulating products for building applications - Determination of compressive creep
EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
EN 29052-1:1992 Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
EN 822:2013 Thermal insulating products for building applications - Determination of length and width
EN 823:2013 Thermal insulating products for building applications - Determination of thickness
EN 824:2013 Thermal insulating products for building applications - Determination of squareness
EN 825:2013 Thermal insulating products for building applications - Determination of flatness
EN 826:2013 Thermal insulating products for building applications - Determination of compression behaviour
EN ISO 1182:2020 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2020)
EN ISO 11925-2:2020 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2020)
EN ISO 16534:2020 Thermal insulating products for building applications - Determination of compressive creep (ISO 16534:2020)
EN ISO 16535:2019 Thermal insulating products for building applications - Determination of long-term water absorption by immersion (ISO 16535:2019)
EN ISO 16536:2019 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)
EN ISO 16546:2020 Thermal insulating products for building applications - Determination of freeze-thaw resistance (ISO 16546:2020)
EN ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018)
EN ISO 29465:2022 Thermal insulating products for building applications - Determination of length and width (ISO 29465:2022)
EN ISO 29466:2022 Thermal insulating products for building applications - Determination of thickness (ISO 29466:2022)
EN ISO 29468:2022 Thermal insulating products for building applications - Determination of flatness (ISO 29468:2022)
EN ISO 29469:2022 Thermal insulating products for building applications - Determination of compression behaviour (ISO 29469:2022)
EN ISO 29470:2020 Thermal insulating products for building applications - Determination of the apparent density (ISO 29470:2020)
EN ISO 29768:2022 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022)
EN ISO 29770:2022 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO 29770:2022)
EN ISO 9229:2007 Thermal insulation - Vocabulary (ISO 9229:2007)
ISO 16269-6:2005 Statistical interpretation of data -- Part 6: Determination of statistical tolerance intervals