SFS-EN 13329:2016 + A1:2017:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with a surface layer based on aminoplastic thermosetting resins as defined in 3.1 and 3.2. It also specifies requirements for marking and packaging.
It includes a classification system, based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice.
Laminate floor coverings are considered for domestic and commercial levels of use, including domestic kitchens. This standard does not specify requirements relating to areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas.

Tämän julkaisun valmistelusta Suomessa vastaa Muoviteollisuus ry, puh. 09 172 841 (vaihde).

Tuoteryhmä(t)

97.150 Muut kuin tekstiililattianpäällysteet »

Sidokset

Velvoittavat viittaukset

EN 16094:2012 Laminate floor coverings - Test method for the determination of micro-scratch resistance
EN 16094:2021 Laminate floor coverings - Test method for the determination of micro-scratch resistance
EN 16354:2018 Laminate floor coverings - Underlays - Specification, requirements and test methods

EN 16094:2012 Laminate floor coverings - Test method for the determination of micro-scratch resistance
EN 16094:2021 Laminate floor coverings - Test method for the determination of micro-scratch resistance
EN 16354:2018 Laminate floor coverings - Underlays - Specification, requirements and test methods
EN 20105-A02:1994 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
EN 311:2002 Wood-based panels - Surface soundness - Test method
EN 318:2002 Wood based panels - Determination of dimensional changes associated with changes in relative humidity
EN 322:1993 Wood-based panels - Determination of moisture content
EN 425:2002 Resilient and laminate floor coverings - Castor chair test
EN 438-1:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
EN 438-2:2016+A1:2018 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
EN 438-3:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-4:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
EN 438-5:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-6:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater
EN 438-7:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
EN 438-8:2018 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for design laminates
EN 438-9:2017 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates
EN ISO 105-B02:2014 Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014)
EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
EN ISO 16581:2019 Resilient and laminate floor coverings - Determination of the effect of simulated movement of a furniture leg (ISO 16581:2014)
EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
EN ISO 4892-2:2006/A1:2009 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1 (ISO 4892-2:2006/Amd 1:2009)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 24334:2014 Laminate floor coverings -- Determination of locking strength for mechanically assembled panels
ISO 24336:2005 Laminate floor coverings -- Determination of thickness swelling after partial immersion in water
ISO 24339:2006 Laminate and textile floor coverings -- Determination of dimensional variations after exposure to humid and dry climate conditions
ISO 48:2010 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 7267-2:2008 Rubber-covered rollers -- Determination of apparent hardness -- Part 2: Shore-type durometer method

Tekninen komitea

CEN/TC 134 Resilient, textile, laminate and modular mechanical locked floor coverings »

Vahvistuspäivä

20.10.2017

Kumouspäivä

01.10.2021

Painos

5

Sivumäärä

41

Julkaisun kieli

englanti

SFS-EN 13329:2016 + A1:2017:en Kumottu