This European Standard defines a method of assessment of drying quality. It applies to a lot of dried sawn timber (surfaced or not). It applies to both softwood and hardwood with a thickness not greater than 100 mm. The quality of drying is expressed in terms of moisture content: target, average of the lot and variation between the pieces of the lot. An option for specifying the degree of case-hardening is included. NOTE 1 Other features related to drying, e.g. check, shake, warp, stain, etc., are specified in documents for visual grading of sawn timber or in product specifications and are not covered by this document. NOTE 2 In the following the term "sawn timber" is used for all dried timber covered by this scope.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
CEN/TS 12169:2008 Criteria for the assessment of conformity of a lot of sawn timber
CEN/TS 14464:2010 Sawn timber - Method for assessment of case-hardening
EN 13183-1:2002 Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method
CEN/TS 12169:2008 Criteria for the assessment of conformity of a lot of sawn timber
CEN/TS 14464:2010 Sawn timber - Method for assessment of case-hardening
EN 13183-1:2002 Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method
EN 13183-2:2002 Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method
EN 1438:1998 Symbols for timber and wood-based products
EN 844-12:2000 Round and sawn timber - Terminology - Part 12: Additional terms and general index
EN 844-3:1995 Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber
EN 844-4:1997 Round and sawn timber - Terminology - Part 4: Terms relating to moisture content