Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Part 1: Test methods for characterisation of compounds and products
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
This European Standard specifies test methods for the determination of properties of composites made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC). NOTE For editorial reasons, in EN 15534 the abbreviation "WPC" is used for ecomposites made from cellulose-based materials and thermoplastics. This part of EN 15534 is applicable to cellular or non-cellular compounds and products, made from cellulose-based materials and thermoplastics, intended to be or being processed through plastics processing techniques, without threshold for the cellulose-based material content. All the properties listed in this part of EN 15534 are not necessarily assessed for a given application. Test parameters and requirements of the test methods for a given application are specified in the relevant part of EN 15534. Profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, profiles for windows or doors and profiles for guttering are not covered by EN 15534).
Tämän julkaisun valmistelusta Suomessa vastaa Kemesta ry, puh. 040 820 4888.
ASTM D 3273:2000 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
CEN/TS 15083-2:2005 Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi
CEN/TS 15676:2007 Wood flooring - Slip resistance - Pendulum test
ASTM D 3273:2000 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
CEN/TS 15083-2:2005 Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi
CEN/TS 15676:2007 Wood flooring - Slip resistance - Pendulum test
CIE 51.2:1999
EN 117:2012 Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method)
EN 13446:2002 Wood-based panels - Determination of withdrawal capacity of fasteners
EN 13823:2020 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 13823:2020+A1:2022 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
EN 13893:2002 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces
EN 152:2011 Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method
EN 16472:2014 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
EN 20105-A02:1994 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
EN 317:1993 Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
EN 322:1993 Wood-based panels - Determination of moisture content
EN 477:1995 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass
EN 479:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion
EN 84:1997 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
EN 927-3:2019 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
EN 927-6:2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
EN ISO 11664-2:2011 Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007)
EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
EN ISO 11925-2:2020 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2020)
EN ISO 16474-3:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
EN ISO 178:2010 Plastics - Determination of flexural properties (ISO 178:2010)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 179-1:2023 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2023)
EN ISO 2813:2014 Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
EN ISO 4628-6:2011 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011)
EN ISO 4628-6:2023 Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2023)
EN ISO 472:2013 Plastics - Vocabulary (ISO 472:2013)
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 75-1:2020 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
EN ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
EN ISO 877-2:2010 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN ISO 9227:2022 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2022)
EN ISO 9239-1:2010 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
EN ISO/CIE 11664-1:2019 Colorimetry - Part 1: CIE standard colorimetric observers (ISO/CIE 11664-1:2019)
EN ISO/CIE 11664-2:2022 Colorimetry - Part 2: CIE standard illuminants (ISO/CIE 11664-2:2022)
EN ISO/CIE 11664-4:2019 Colorimetry - Part 4: CIE 1976 L*a*b* colour space (ISO/CIE 11664-4:2019)
ENV 12038:2002 Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes
ISO 11359-2:1999 Plastics -- Thermomechanical analysis (TMA) -- Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 16869:2008 Plastics -- Assessment of the effectiveness of fungistatic compounds in plastics formulations
ISO 18314-1:2015 Analytical colorimetry -- Part 1: Practical colour measurement