Maalit ja lakat. Teräsrakenteiden korroosionesto suojamaaliyhdistelmillä. Osa 9: Suojamaaliyhdistelmät ja laboratorion suorituskyvyn testimenetelmät offshore- ja vastaavissa rakenteissa
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
Tämä asiakirja määrittelee suojamaaliyhdistelmien suorituskykyvaatimukset offshore-rakenteissa ja vastaavissa rakenteissa (ts. jotka altistuvat meri-ilmastolle tai jotka ovat upotettuina meri- tai murtoveteen). Tällaiset rakenteet altistuvat ympäristölle standardissa ISO 12944-2 määritellyille rasitusluokille CX (offshore) ja upotuksessa rasitusluokalle Im4. Tässä osassa ISO 12944 kuvataan hyvin kestävät maaliyhdistelmät standardin ISO 12944-1 mukaisesti. Tämä asiakirja soveltuu rakenteille, jotka on tehty hiiliteräksestä ja jotka eivät sisällä Cd/Bi Cr ja Zn/Bi Cr pintoja. Sitä ei voida käyttää eristyksen tai betonin pinnoille. Tätä asiakirjaa sovelletaan maaliyhdistelmille, joiden käyttölämpötila-alue on välillä −20 °C – +80 °C, ja suorituskyvyn testauksen tarkoituksena on varmistaa maaliyhdistelmien soveltuvuus tälle lämpötila-alueelle. Tämä asiakirja soveltuu maaliyhdistelmiin vedenalaiselle huollolle (Im4), jotka on tarkoitettu ympäröivälle käyttölämpötilalle korkeintaan 50 ° C. Tämä asiakirja määrittelee: — koemenetelmät, joita tulee käyttää määritettäessä suojamaaliyhdistelmän eri komponenttien koostumusta — laboratoriossa tehtävät suorituskyvyn testimenetelmät suojamaaliyhdistelmän todennäköisen kestävyyden arvioimiseen — arviointiperusteet, joita tulee käyttää suorituskykytestien tulosten tarkastelussa. Tämä asiakirja kattaa vaatimukset uudisrakenteille ja tarvittaville korjauksille ennen käyttöönottoa. Sitä voidaan käyttää myös kunnossapitotöissä, kun täydellinen kunnostus suoritetaan ja alapuolinen metallialusta altistuu täysin raesuihkupuhdistuksesta. Siinä ei käsitellä yleisesti kunnossapitoa, missä yleensä käytetään muita pintakäsittelymenetelmiä kuin raesuihkupuhdistusta. Tämä asiakirja käsittelee vähintään 3 mm: n paksuisista hiiliteräksistä valmistettuja rakenteita, jotka on suunniteltu hyväksyttyjen lujuuslaskelmien avulla. Tämä asiakirja ei kata seuraavia: — ruostumattomasta teräksestä valmistetut rakenteet sekä kuparista, titaanista tai alumiinista tai niiden seoksista valmistetut rakenteet — teräskaapelit — hautautuneet rakenteet — putkistot — varastosäiliöiden sisätilat.
Tämän julkaisun valmistelusta Suomessa vastaa Kemesta ry, puh. 040 820 4888.
Sisällysluettelo
Esipuhe (CEN)
Voimaansaattamisilmoitus
Esipuhe (ISO)
Johdanto
1 Soveltamisala
2 Velvoittavat viittaukset
3 Termit ja määritelmät
4 Soveltuvuusalue
4.1 Ympäristötyyppi
4.2 Pinnan tyyppi ja pinnan esikäsittely
4.3 Maalityyppi
5 Keinotekoisen ikääntymisen ja luonnollisen altistumisen suhde
6 Maalit
6.1 Yleistä
6.2 Laadunvarmistus
6.3 Pakkaus ja merkintä
6.4 Vaadittavat tuotetiedot
6.5 Maalin tunnistus
6.6 Luottamukselliset tiedot
7 Suojamaaliyhdistelmät
7.1 Kuvaus
7.2 Vähimmäisvaatimukset suojamaaliyhdistelmille
8 Maalien levitystestaus
9 Maaliyhdistelmien suorituskykytestaus
9.1 Koelevyjen esikäsittely ja ja vakiointi
9.2 Laatuhyväksyntätestit
9.3 Arviointi – menetelmät ja vaatimukset
10 Testausseloste
Liite A Viiltolinja sykliselle vanhentamistestille ja merivesiupotukselle (velvoittava)
ISO 12944-1:2017 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction
ISO 12944-2:2017 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments
ISO 12944-4:2017 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation
ISO 12944-1:2017 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction
ISO 12944-2:2017 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments
ISO 12944-4:2017 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation
ISO 12944-5:2007 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods
ISO 1514:2016 Paints and varnishes -- Standard panels for testing
ISO 15711:2003 Paints and varnishes -- Determination of resistance to cathodic disbonding of coatings exposed to sea water
ISO 16474-3:2013 Paints and varnishes -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
ISO 19840:2012 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
ISO 2063-1:2017 Thermal spraying -- Zinc, aluminium and their alloys -- Part 1: Design considerations and quality requirements for corrosion protection systems
ISO 2063-2:2017 Thermal spraying -- Zinc, aluminium and their alloys -- Part 2: Execution of corrosion protection systems
ISO 2811-1:2016 Paints and varnishes -- Determination of density -- Part 1: Pycnometer method
ISO 2811-2:2011 Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method
ISO 2811-3:2011 Paints and varnishes -- Determination of density -- Part 3: Oscillation method
ISO 2811-4:2011 Paints and varnishes -- Determination of density -- Part 4: Pressure cup method
ISO 2812-2:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method
ISO 29601:2011 Paints and varnishes -- Corrosion protection by protective paint systems -- Assessment of porosity in a dry film
ISO 3233-1:2013 Paints and varnishes -- Determination of the percentage volume of non-volatile matter -- Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
ISO 3251:2008 Paints, varnishes and plastics -- Determination of non-volatile-matter content
ISO 3270:1984 Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing
ISO 4624:2016 Paints and varnishes -- Pull-off test for adhesion
ISO 4628-2:2016 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 2: Assessment of degree of blistering
ISO 4628-3:2016 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 3: Assessment of degree of rusting
ISO 4628-4:2016 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking
ISO 4628-5:2016 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 5: Assessment of degree of flaking
ISO 4628-6:2011 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 6: Assessment of degree of chalking by tape method
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure
ISO 9117-3:2010 Paints and varnishes -- Drying tests -- Part 3: Surface-drying test using ballotini
ISO 9227:2017 Corrosion tests in artificial atmospheres -- Salt spray tests