This European Standard specifies requirements for unbound mixtures used for construction and maintenance of roads, airfields and other trafficked areas. This European Standard applies to unbound mixtures of natural, manufactured and recycled aggregates with an upper sieve size (D) from 5,6 mm to 90 mm and lower sieve size (d) = 0 at the point of delivery. NOTE 1 Mixtures with an upper sieve size (D) greater than 90 mm are not covered by this European Standard but may be specified in the place of use. NOTE 2 Water content of the mixture and the density of the installed layer are not specified mixture requirements. Both parameters are related to the control of the construction of the layer and are outside the scope of this European Standard. The aggregate requirements are defined with appropriate cross-reference to EN 13242. Use of aggregates as soil is not covered by this standard.
Tämän julkaisun valmistelusta Suomessa vastaa Väylä, puh. 0295 343000 (vaihde).
EN 13242:2002 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13242:2013 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
EN 13242:2002 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13242:2013 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
EN 13286-1:2021 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
EN 13286-4:2021 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table
EN 16236:2013 Evaluation of conformity of aggregates - Initial Type Testing and Factory Production Control
EN 16236:2018 Assessment and Verification of the Constancy of Performance (AVCP) of aggregates - Type testing and Factory Production Control
EN 932-1:1996 Tests for general properties of aggregates - Part 1: Methods for sampling
EN 932-5:2012 Tests for general properties of aggregates - Part 5: Common equipment and calibration
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method