Verkkokauppa
SFS-EN 17119:2018:en
Non-destructive testing. Thermographic testing. Active thermography
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.
This document defines the procedures for non-destructive testing using active thermography.
These testing procedures can be applied to different materials (e.g. composites, metals and coatings) and are appointed, but not limited to the:
— detection of discontinuities (e.g. voids, cracks, inclusions, delaminations);
— determination of layer or part thicknesses;
— determination and comparison of thermophysical properties.
This standard is describing data acquisition and analysis principles for active thermography and is giving an informative guideline for appropriate selection of the excitation source. Acceptance criteria are not defined in this standard.
Active thermography is applied in industrial production (e.g. compound materials, vehicle parts, engine parts, power plant parts, joining technology, electronic devices) and in maintenance and repair (e.g. aerospace, power plants, civil engineering).
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
This document defines the procedures for non-destructive testing using active thermography.
These testing procedures can be applied to different materials (e.g. composites, metals and coatings) and are appointed, but not limited to the:
— detection of discontinuities (e.g. voids, cracks, inclusions, delaminations);
— determination of layer or part thicknesses;
— determination and comparison of thermophysical properties.
This standard is describing data acquisition and analysis principles for active thermography and is giving an informative guideline for appropriate selection of the excitation source. Acceptance criteria are not defined in this standard.
Active thermography is applied in industrial production (e.g. compound materials, vehicle parts, engine parts, power plant parts, joining technology, electronic devices) and in maintenance and repair (e.g. aerospace, power plants, civil engineering).
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Tuoteryhmä(t)
Sidokset
Velvoittavat viittaukset
CEN/TR 14748:2004 Non-destructive testing - Methodology for qualification of non-destructive tests
EN 15042-2:2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method
EN 16714-1:2016 Non-destructive testing - Thermographic testing - Part 1: General principles
EN 15042-2:2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method
EN 16714-1:2016 Non-destructive testing - Thermographic testing - Part 1: General principles
Tekninen komitea
Vahvistuspäivä
10.08.2018
Julkaisupäivä
14.08.2018
Painos
1
Sivumäärä
15
Julkaisun kieli
englanti