IEC 62282-5-100:2018 covers construction, marking and test requirements for portable fuel cell power systems. These fuel cell systems are movable and not fastened or otherwise secured to a specific location. The purpose of the portable fuel cell power system is to produce electrical power. This document applies to AC and DC type portable fuel cell power systems, with a rated output voltage not exceeding 600 V AC, or 850 V DC for indoor and outdoor use.
Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60079-10-1:2015 Räjähdysvaaralliset tilat. Osa 10-1: Tilaluokitus. Kaasuräjähdysvaaralliset tilat
EN 60079-10-2:2009 Räjähdysvaaralliset tilat. Osa 10-2: Tilaluokitus. Pölyräjähdysvaaralliset tilat
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60079-10-1:2015 Räjähdysvaaralliset tilat. Osa 10-1: Tilaluokitus. Kaasuräjähdysvaaralliset tilat
EN 60079-10-2:2009 Räjähdysvaaralliset tilat. Osa 10-2: Tilaluokitus. Pölyräjähdysvaaralliset tilat
EN 60079-10-2:2015 Räjähdysvaaralliset tilat. Osa 10-2: Tilaluokitus. Pölyräjähdysvaaralliset tilat
EN 60079-29-1:2016 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
EN 60079-29-1:2016/A11:2022 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
EN 60079-29-1:2016/A1:2022 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
EN 60079-29-2:2007 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
EN 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
EN 60079-29-3:2014 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems
EN 60079-29-4:2010 Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases
EN 60079-2:2014 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
EN 60204-1:2018 Koneturvallisuus. Koneiden sähkölaitteisto. Osa 1: Yleiset vaatimukset
EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
EN 60335-1:2012 Kotitalouksiin ja vastaaviin käyttöihin tarkoitetut sähkölaitteet. Turvallisuus. Osa 1: Yleiset vaatimukset
EN 60335-1:2012/A1:2019 Household and similar electrical appliances - Safety - Part 1: General requirements
EN 60335-1:2012/A2:2019 Household and similar electrical appliances - Safety - Part 1: General requirements
EN 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
EN 60695-2-13:2010 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 60730-1:2016/A1:2019 Automatic electrical controls - Part 1: General requirements
EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
EN 60950-1:2006 Information technology equipment - Safety - Part 1: General requirements
EN 60950-1:2006/A1:2010 Information technology equipment - Safety - Part 1: General requirements
EN 60950-1:2006/A2:2013 Information technology equipment - Safety - Part 1: General requirements
EN 60990:2016 Methods of measurement of touch current and protective conductor current
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
EN 61025:2007 Fault tree analysis (FTA)
EN 61032:1998 Koteloinnilla aikaansaatu henkilö- ja esinesuojaus. Todentamisessa käytettävät koettimet
EN 61508-1:2010 Sähköisten/elektronisten/ohjelmoitavien elektronisten turvallisuuteen liittyvien järjestelmien toiminnallinen turvallisuus. Osa 1: Yleiset vaatimukset
EN 61511-1:2017 Toiminnallinen turvallisuus. Turva-automaatiojärjestelmät prosessiteollisuussektorille. Osa 1: Rakenne, määritelmät, järjestelmän, laitteiston ja sovellusohjelmoinnin vaatimukset
EN 61511-3:2017 Toiminnallinen turvallisuus. Turva-automaatiojärjestelmät prosessiteollisuussektorille. Osa 3: Ohjeita vaadittavien turvallisuuden eheyden tasojen määrittämiseen
EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide
EN 62133-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems
EN 62133-2:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems
EN 62133-2:2017/A1:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems
EN IEC 60079-10-1:2021 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
EN IEC 60079-15:2019 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN IEC 60086-4:2019 Primary batteries - Part 4: Safety of lithium batteries
EN IEC 60695-2-11:2021 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)
EN IEC 60695-2-13:2021 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
EN IEC 60812:2018 Failure modes and effects analysis (FMEA and FMECA)
EN IEC 60934:2019 Circuit breakers for equipment (CBE)
EN IEC 61000-3-2:2019 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current =16 A per phase)
EN IEC 61000-6-1:2019 Sähkömagneettinen yhteensopivuus (EMC). Osa 6-1: Yleiset standardit. Häiriönsieto kotitalous-, toimisto- ja kevyen teollisuuden ympäristöissä
EN IEC 61000-6-2:2019 Sähkömagneettinen yhteensopivuus (EMC). Osa 6-2: Yleiset standardit. Häiriönsieto teollisuusympäristöissä
EN IEC 61000-6-3:2021 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments
EN IEC 61000-6-4:2019 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
EN IEC 62040-1:2019 Uninterruptible power systems (UPS) - Part 1: Safety requirements
EN IEC 62040-2:2018 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
EN IEC 62282-2-100:2020 Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
EN ISO 16017-1:2000 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000)
EN ISO 7010:2020 Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2019, Corrected version 2020-06)
FprEN 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
HD 60364-4-41:2017 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60335-1:2010/A2:2016 Amendment 2 - Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60529:2013
IEC 60884-1:2002 Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
ISO 15649:2001 Petroleum and natural gas industries -- Piping
ISO 16000-3:2011 Indoor air -- Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air -- Active sampling method
ISO 16000-6:2011 Indoor air -- Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
ISO 16111:2008 Transportable gas storage devices -- Hydrogen absorbed in reversible metal hydride
ISO 16528-1:2007 Boilers and pressure vessels -- Part 1: Performance requirements
ISO 3864-1:2002 Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs in workplaces and public areas
ISO 3864-1:2011 Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs and safety markings
ISO 3864-2:2004 Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels
ISO 3864-2:2004/Amd 1:2011 Revision of Table B.1
ISO 3864-2:2016 Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels
ISO 3864-3:2006 Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols for use in safety signs
ISO 3864-3:2012 Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols for use in safety signs
ISO 3864-4:2011 Graphical symbols -- Safety colours and safety signs -- Part 4: Colorimetric and photometric properties of safety sign materials
ISO 7000:2014 Graphical symbols for use on equipment -- Registered symbols