This document defines the requirements for the design and manufacture of aluminium and steel trusses used in the entertainment industry. This document does not cover individual, separate rigging hardware like shackles, wire ropes, slings and other lifting accessories.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
EN 1090-2:2018 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1:2024 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1:2024 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-3:2019 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 1990:2002 Eurocode - Basis of structural design
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-2:2024 Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-3:2003/A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4:2005/A1:2010 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-2:2003 Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges
EN 1991-2:2023 Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1993-1-10:2005 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-11:2006 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
EN 1993-1-12:2007 Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
EN 1993-1-13:2024 Eurocode 3 - Design of steel structures - Part 1-13: Beams with large web openings
EN 1993-1-1:2005 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-1:2005/A1:2014 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-1:2022 Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-2:2005 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
EN 1993-1-2:2024 Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1993-1-3:2006 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-1-3:2024 Eurocode 3 - Design of steel structures - Part 1-3: Cold-formed members and sheeting
EN 1993-1-4:2006 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-4:2006/A1:2015 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-4:2006/A2:2020 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-5:2006 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2006/A1:2017 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2006/A2:2019 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2024 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-6:2007 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-6:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-7:2007 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
EN 1993-1-8:2005 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
EN 1993-1-8:2024 Eurocode 3 - Design of steel structures - Part 1-8: Joints
EN 1993-1-9:2005 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 1993-2:2006 Eurocode 3 - Design of steel structures - Part 2: Steel Bridges
EN 1993-3-1:2006 Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts
EN 1993-3-2:2006 Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys
EN 1993-4-1:2007 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-1:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-2:2007 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-2:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-3:2007 Eurocode 3 - Design of steel structures - Part 4-3: Pipelines
EN 1993-5:2007 Eurocode 3 - Design of steel structures - Part 5: Piling
EN 1993-6:2007 Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures
EN 1999-1-1:2007 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2007/A1:2009 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2007/A2:2013 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2023 Eurocode 9 - Design of aluminium structures - Part 1-1: General rules
EN 1999-1-2:2007 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-2:2023 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-3:2007 Eurocode 9: Design of aluminium structures – Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2007/A1:2011 Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2023 Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-4:2007 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2007/A1:2011 Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2023 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-5:2007 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 1999-1-5:2023 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN IEC/IEEE 82079-1:2020 Tuotteiden käyttöohjeiden laatiminen. Osa 1: Periaatteet ja yleiset vaatimukset
EN ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005)
EN ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
EN ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005)
EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
EN ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)
EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
EN ISO 3834-5:2015 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015)
EN ISO 3834-5:2021 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
EN ISO 3834-6:2024 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024)
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)