This European Standard specifies requirements and test methods for marketed and delivered automotive B10 diesel fuel, i.e. diesel fuel containing up to 10,0 %(V/V) Fatty Acid Methyl Ester. It is applicable to fuel for use in diesel engine vehicles compatible with automotive B10 diesel fuel. NOTE 1 This product is allowed in Europe [4], but national legislation can set additional requirements or rules concerning, or even prohibiting, marketing or delivering of the product. NOTE 2 In this European Standard, A-deviations apply (see Annex B). NOTE 3 For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction and the volume fraction.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
EN 12662:2014 Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
EN 12662:2014 Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
EN 14214:2012+A1:2014 Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
EN 15195:2014 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
EN 15751:2014 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
EN 16144:2012 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
EN 16576:2014 Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method
EN 16715:2015 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
EN 16906:2017 Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method
EN 16942:2016 Fuels - Identification of vehicle compatibility - Graphical expression for consumer information
EN 23015:1994 Petroleum products - Determination of cloud point (ISO 3015:1992)
EN ISO 10370:2014 Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014)
EN ISO 12156-1:2018 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2018)
EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
EN ISO 12205:1996 Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995)
EN ISO 12937:2000 Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000)
EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
EN ISO 13759:1996 Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996)
EN ISO 20846:2011 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011)
EN ISO 20884:2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011)
EN ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
EN ISO 2719:2016 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
EN ISO 3104:1996 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
EN ISO 3171:1999 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
EN ISO 3405:2011 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011)
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 3924:2016 Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2016)
EN ISO 4259:2006 Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006)
EN ISO 4264:2007 Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:2007)
EN ISO 5165:1998 Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998)
EN ISO 6245:2002 Petroleum products - Determination of ash (ISO 6245:2001)