SFS-EN IEC 60204-11:2019:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

NEW!IEC 60204-11:2018 is available as IEC 60204-11:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60204-11:2018 applies to electrical and electronic equipment and systems to machines, including a group of machines working together in a co-ordinated manner, which operate at nominal voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV AC or DC with nominal frequencies not exceeding 60 Hz. IEC 60204-11:2018 cancels and replaces the first edition, published in 2000. This edition constitutes a technical revision. This edition contains significant technical changes with respect to the previous edition regarding the following:

– aspects of risk assessment, which are mirrored from ISO 12100;

– equipotential bonding and earthing;

– EMC and power quality;

– HV switchgear and controlgear;

– creepage distances for conductors and slip-ring assemblies;

– a list of machinery using HV equipment, in Annex A.

IEC 60204-11:2018 has been updated and improved to reflect the experience gained with the first edition and the evolution of high-voltage equipment reflected in the relevant standards. Regarding formal requirements, IEC 60204-11 has been aligned with

– IEC 60204-1:2016,

– IEC 61936-1:2010 and IEC 61936-1:2010/AMD1:2014,

– IEC 62271 (all parts). This document is intended to be used in conjunction with IEC 60204-1.

Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.

Tuoteryhmä(t)

13.110 Koneturvallisuus »
29.020 Sähkötekniikka, yleistä »

Sidokset

Velvoittavat viittaukset

EN 60071-2:1997 Insulation co-ordination - Part 2: Application guide
EN 60076-5:2006 Power transformers - Part 5: Ability to withstand short-circuit
EN 60204-1:2018 Koneturvallisuus. Koneiden sähkölaitteisto. Osa 1: Yleiset vaatimukset

EN 60071-2:1997 Insulation co-ordination - Part 2: Application guide
EN 60076-5:2006 Power transformers - Part 5: Ability to withstand short-circuit
EN 60204-1:2018 Koneturvallisuus. Koneiden sähkölaitteisto. Osa 1: Yleiset vaatimukset
EN 60417-1:1999 Graphical symbols for use on equipment - Part 1: Overview and application
EN 60417-2:1999 Graphical symbols for use on equipment - Part 2: Symbol originals
EN 60865-1:2012 Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
EN 61800-1:1998 Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems
EN 61800-2:1998 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems
EN 61800-2:2015 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems
EN 61800-3:1996 Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods
EN 61800-3:1996/A11:2000 Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods
EN 61800-3:2004 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
EN 61800-3:2004/A1:2012 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
EN 61800-4:2003 Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV
EN 61936-1:2010 Power installations exceeding 1 kV a.c. - Part 1: Common rules
EN 61936-1:2010/A1:2014 Power installations exceeding 1 kV a.c. - Part 1: Common rules
EN 62061:2005 Koneturvallisuus. Turvallisuuteen liittyvien sähköisten, elektronisten ja ohjelmoitavien elektronisten ohjausjärjestelmien toiminnallinen turvallisuus
EN 62271-103:2011 High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV
EN 62271-105:2012 High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV
EN 62271-200:2012 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
EN 62271-201:2014 High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
EN 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery
EN IEC 61800-1:2021 Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed DC power drive systems
EN IEC 61800-2:2021 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for adjustable speed AC power drive systems
EN IEC 61800-3:2018 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
EN IEC 61800-3:2023 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools
EN IEC 62061:2021 Safety of machinery - Functional safety of safety-related control systems
EN IEC 62271-102:2018 High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches
EN IEC 62271-103:2023 High-voltage switchgear and controlgear - Part 103: Alternating current switches for rated voltages above 1 kV up to and including 52 kV
EN IEC 62271-105:2023 High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV
EN IEC 62271-107:2019 High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 13849-1:2023 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023)
EN ISO 7010:2012 Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011)
HD 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
IEC 60529:2013
ISO 3864-1:2011 Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs and safety markings
ISO 3864-2:2016 Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels

Tekninen komitea

CLC/TC 44X Safety of machinery: electrotechnical aspects »

Direktiivi

2006/42/EC Koneturvallisuus

http://ec.europa.eu »

Vahvistuspäivä

08.02.2019

Julkaisupäivä

12.02.2019

Painos

1

Sivumäärä

65

Julkaisun kieli

englanti