Betonirakenteiden suojaus- ja korjausaineet ja niiden yhdistelmät. Määritelmät, vaatimukset, laadunvalvonta ja vaatimustenmukaisuuden arviointi. Osa 3: Rakenteellinen ja ei-rakenteellinen korjaus
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
Tämä eurooppalainen standardi määrittelee tunnistusta, toimivuutta (mukaan lukien säilyvyys) ja turvallisuutta koskevat vaatimukset aineille ja niiden yhdistelmille, joita käytetään betonirakenteiden rakenteelliseen ja ei-rakenteelliseen korjaamiseen. Tämä eurooppalainen standardi käsittelee korjauslaasteja ja -betoneita, joita käytetään mahdollisesti muiden aineiden ja niiden yhdistelmien kanssa korjaamaan ja/tai korvaamaan viallista betonia ja suojaamaan raudoitusta silloin, kun nämä toimenpiteet ovat välttämättömiä, jotta pidennetään huonontumista osoittavan betonirakenteen käyttöikää. Käsitellyt soveltamistavat ovat ENV 1504-9:n mukaisesti seuraavat: Periaate 3 Betonin korjaus Menetelmä 3.1 Käsin tehtävä laastipaikkaus Menetelmä 3.2 Betonointi valamalla Menetelmä 3.3 Ruiskubetonointi tai laastin ruiskutus Periaate 4 Rakenteen vahventaminen Menetelmä 4.4 Laastin tai betonin lisääminen Periaate 7 Passiivisuuden säilyttäminen Menetelmä 7.1 Raudoituksen betonipeitteen paksuntaminen laastilla tai palauttaminen tai betonilla Menetelmä 7.2 Epäpuhtaan betonin korvaaminen uudella
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 1015-17:2000 Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars
EN 12190:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
EN 12192-1:2002 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar
EN 1015-17:2000 Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars
EN 12190:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
EN 12192-1:2002 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar
EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion
EN 13036-4:2011 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
EN 13057:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption
EN 13294:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time
EN 13295:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation
EN 13395-1:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars
EN 13395-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar
EN 13395-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete
EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13687-1:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion
EN 13687-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock)
EN 13687-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling
EN 1504-1:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
EN 1504-8:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity
EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
EN 1766:2017 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
EN 1767:1999 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
EN 1770:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion
EN 1877-1:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent
EN 1877-2:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number
EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
EN ISO 11358-1:2022 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2022)
EN ISO 3251:2019 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
EN ISO 9514:2019 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019)
ENV 1504-9:1997 Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 9: General principles for the use of products and systems