IEC 61076-2-012:2020 ed1.0 (2020-07)

Soveltamisala

IEC 61076-2-012:2020 specifies circular connectors with an inner push‑pull locking mechanism of a size derived from and thus being compatible with M12 screw‑locking connectors and with mating interfaces according to IEC 61076‑2‑101, IEC 61076‑2‑109, IEC 61076‑2‑111 and IEC 61076‑2‑113.
A female fixed connector with inner push-pull locking according to this document is intermateable with a correspondingly coded male free connector with M12 screw-locking according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 or IEC 61076-2-113.
This document covers both:
a) power connectors with current ratings up to 16 A and voltage ratings up to 630 V, typically used for power supply of electrical equipment used in industrial premises, and
b) connectors for data and signal transmission with frequencies up to 500 MHz.
These connectors consist of both fixed and free connectors, either rewirable or non‑rewirable, with M12 inner push‑pull locking as explained above. Male connectors have round contacts from Ø0,6 mm up to Ø1,5 mm.
This document covers various types of connectors identified by their "codings" with different contact arrangement, not mutually interchangeable.
The design of the inner push‑pull mechanism prevents the unintended mating of the male inner push‑pull free connector with the female connector with M12 screw‑locking even for identical coding.
Some styles of free connectors with female contacts covered in this document are equipped with both inner and outer push-pull locking for intermateability also with correspondingly coded male fixed or free connectors according to IEC 61076-2-010.

Tuoteryhmä(t)

31.220.10 Plug-and-socket devices. Connectors »

Sidokset

Velvoittavat viittaukset

IEC 60050–581–2008 International Electrotechnical Vocabulary – Part 581: Electromechanical components for electronic equipment
IEC 60068–1 Environmental testing – Part 1: General and guidance
IEC 60512–13–1 Connectors for electronic equipment – Tests and measurements – Part 13-1: Mechanical operation tests – Test 13a: Engaging and separating forces

IEC 60050–581–2008 International Electrotechnical Vocabulary – Part 581: Electromechanical components for electronic equipment
IEC 60068–1 Environmental testing – Part 1: General and guidance
IEC 60512–13–1 Connectors for electronic equipment – Tests and measurements – Part 13-1: Mechanical operation tests – Test 13a: Engaging and separating forces
IEC 60512–13–2 Connectors for electronic equipment – Tests and measurements – Part 13-2: Mechanical operation tests – Test 13b: Insertion and withdrawal forces
IEC 60512–13–5 Connectors for electronic equipment – Tests and measurements – Part 13-5: Mechanical operation tests – Test 13e: Polarizing and keying method
IEC 60512–15–6 Connectors for electronic equipment – Tests and measurements – Part 15-6: Connector tests (mechanical) – Test 15f: Effectiveness of connector coupling devices
IEC 60512–2–1 Connectors for electronic equipment – Tests and measurements – Part 2-1: Electrical continuity and contact resistance tests – Test 2a: Contact resistance – Millivolt level method
IEC 60512–3–1 Connectors for electronic equipment – Tests and measurements – Part 3-1: Insulation tests – Test 3a: Insulation resistance
IEC 60512–4–1 Connectors for electronic equipment – Tests and measurements – Part 4-1: Voltage stress tests – Test 4a: Voltage proof
IEC 60512–5–1 Connectors for electronic equipment – Tests and measurements – Part 5-1: Current-carrying capacity tests – Test 5a: Temperature rise
IEC 60512–6–3 Connectors for electronic equipment – Tests and measurements – Part 6-3: Dynamic stress tests – Test 6c: Shock
IEC 60512–6–4 Connectors for electronic equipment – Tests and measurements – Part 6-4: Dynamic stress tests – Test 6d: Vibration (sinusoidal)
IEC 60512–9–1 Connectors for electronic equipment – Tests and measurements – Part 9-1: Endurance tests – Test 9a: Mechanical operation
IEC 60529:1989 Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989/AMD1:1999
IEC 60529:1989/AMD2:2013
IEC 60664–1 Insulation coordination for equipment within low-voltage systems – Part 1: Principles, requirements and tests
IEC 60998–2–1:2002 Connecting devices for low-voltage circuits for household and similar purposes – Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
IEC 61076–1:2006 Connectors for electronic equipment – Product requirements – Part 1: Generic specification
IEC 61076–2–010 Connectors for electronic equipment – Product requirements – Part 2-010: Circular connectors – Detail specification for push-pull connectors with outer locking mechanism, based on mating interfaces according to urn:iec:std:iec:61076-2-101::::IEC 61076-2-101, urn:iec:std:iec:61076-2-109::::IEC 61076-2-109, urn:iec:std:iec:61076-2-111::::IEC 61076-2-111 and urn:iec:std:iec:61076-2-113::::IEC 61076-2-1131
IEC 61076–2–101:2012 Connectors for electronic equipment – Product requirements – Part 2-101: Circular connectors – Detail specification for M12 connectors with screw-locking
IEC 61076–2–109:2014 Connectors for electronic equipment – Product requirements – Part 2-109: Circular connectors – Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
IEC 61076–2–111:2017 Connectors for electrical and electronic equipment – Product requirements – Part 2-111: Circular connectors – Detail specification for power connectors with M12 screw-locking
IEC 61076–2–113:2017 Connectors for electronic equipment – Product requirements – Part 2-113: Circular connectors – Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
IEC 61984 Connectors – Safety requirements and tests

Tekninen komitea

IEC/TC 48/SC 48B Electrical connectors »

Vahvistuspäivä

27.07.2020

Julkaisupäivä

27.07.2020

Painos

1.0

Sivumäärä

121

Julkaisun kieli

englanti