SFS-EN 1999-1-1:2023:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

1.1 Scope of FprEN 1999-1-1
(1) FprEN 1999-1-1 gives basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys (see Clause 5 and Annex C).
This document does not cover the following, unless otherwise explicitly stated in this document:
- components with material thickness less than 0,6 mm;
- welded components with material thickness less than 1,5 mm;
- connections with:
- steel bolts and pins with diameter less than 5 mm;
- aluminium bolts and pins with diameter less than 8 mm;
- rivets and thread forming screws with diameter less than 3,9 mm.
1.2 Assumptions
(1) In addition to the general assumptions of EN 1990 the following assumptions apply:
- execution complies with EN 1090-3 and EN 1090-5;
- the mechanical properties comply with the product standards listed in 5.2.2.
(2) EN 1999 is intended to be used in conjunction with:
- European Standards for construction products relevant for aluminium structures;
- EN 1090-1, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components;
- EN 1090-3, Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures;
- EN 1090-5, Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

91.080.17 Alumiinirakenteet »
91.010.30 Tekniset näkökohdat »
92.209 Alumiinirakenteiden suunnittelu »

Sidokset

Velvoittavat viittaukset

EN 10204:2004 Metallic products - Types of inspection documents
EN 1090-3:2019 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications

EN 10204:2004 Metallic products - Types of inspection documents
EN 1090-3:2019 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
EN 14399-1:2015 High-strength structural bolting assemblies for preloading - Part 1: General requirements
EN 14399-3:2015 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
EN 14399-4:2015 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
EN 14399-5:2015 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
EN 14399-6:2015 High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
EN 14399-8:2018 High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
EN 15048-1:2016 Non-preloaded structural bolting assemblies - Part 1: General requirements
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-2:2024 Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-3:2003/A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4:2005/A1:2010 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-2:2003 Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges
EN 1991-2:2023 Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1993-1-11:2006 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
EN 1993-1-8:2005 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
EN 1993-1-8:2024 Eurocode 3 - Design of steel structures - Part 1-8: Joints
EN 1999-1-2:2023 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-3:2023 Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-4:2023 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-5:2023 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
EN ISO 3506-1:2020 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)
EN ISO 3506-2:2020 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)

Tekninen komitea

CEN/TC 250/SC 9 Eurocode 9: Design of aluminium structures »

Direktiivi

305/2011 Rakennustuotteet

http://ec.europa.eu »

Vahvistuspäivä

31.03.2023

Julkaisupäivä

04.04.2023

Painos

1

Sivumäärä

372

Julkaisun kieli

englanti

Lisätiedot

Tämä on nk. toisen sukupolven eurokoodi, jota ei ole vielä otettu käyttöön Suomessa. Katso tätä standardia vastaava ensimmäisen sukupolven standardi. Lisätietoja eurokoodeista www.eurocodes.fi.