1.1 Scope of EN 1996-3 (1) This document provides simplified calculation methods to facilitate the design of the following unreinforced masonry walls, subject to certain conditions of application: - walls subjected to vertical and wind loading; - walls subjected to concentrated loads; - shear walls; - basement walls subjected to lateral earth pressure and vertical loading; - walls subjected to lateral loading but not subjected to vertical loading. NOTE 1 For those types of masonry structures or parts of structures not covered by (1), the design can be based on EN 1996-1-1. NOTE 2 The rules given in this document are consistent with those given in EN 1996-1-1 but are more conservative in respect of the conditions and limitations of their use. (2) This document applies only to those masonry structures, or parts thereof, that are described in EN 1996-1-1 and EN 1996-2. (3) The simplified calculation methods given in this document do not cover the design of double-leaf walls. (4) The simplified calculation methods given in this document do not cover the design for accidental situations. 1.2 Assumptions (1) The assumptions of EN 1990 apply to this document. (2) This document is intended to be used, for direct application, together with EN 1990, the EN 1991 series, EN 1996 1-1, EN 1996-1-2 and EN 1996-2. (3) The rules given in this document assume that concrete floors are designed according to EN 1992-1-1.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-2:2024 Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-3:2003/A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4:2005/A1:2010 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-2:2023 Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1996-1-1:2022 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-2:2006 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar
Tämä on nk. toisen sukupolven eurokoodi, jota ei ole vielä otettu käyttöön Suomessa. Katso tätä standardia vastaava ensimmäisen sukupolven standardi. Lisätietoja eurokoodeista www.eurocodes.fi.