1.1 Scope of EN 1991 1 2 (1) The methods given in this Eurocode are applicable to buildings and civil engineering works, with a fire load related to the building and its occupancy. (2) EN 1991 1 2 deals with thermal and mechanical actions on structures exposed to fire. It is intended to be used in conjunction with the fire design Parts of EN 1992 to EN 1996 and EN 1999 which give rules for designing structures for fire resistance. (3) EN 1991 1 2 contains thermal actions either nominal or physically based. More data and models for physically based thermal actions are given in annexes. (4) EN 1991 1 2 does not cover the assessment of the damage of a structure after a fire. (5) EN 1991 1 2 does not cover supplementary requirements concerning, for example: - the possible installation and maintenance of sprinkler systems; - conditions on occupancy of building or fire compartment; - the use of approved insulation and coating materials, including their maintenance. 1.2 Assumptions (1) In addition to the general assumptions of EN 1990 the following assumptions apply: - any active and passive fire protection systems taken into account in the design will be adequately maintained; - the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 13501-2:2023 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1992-1-1:2023 Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
EN 13501-2:2023 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1992-1-1:2023 Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
EN 1992-1-2:2023 Eurocode 2 - Design of concrete structures – Part 1-2: Structural fire design
EN 1992-4:2018 Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete
EN 1993-1-2:2024 Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1996-1-1:2022 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-2:2005 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-2:2006 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
EN 1996-3:2023 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 1999-1-1:2023 Eurocode 9 - Design of aluminium structures - Part 1-1: General rules
EN 1999-1-2:2023 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-3:2023 Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-4:2023 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-5:2023 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
Tämä on nk. toisen sukupolven eurokoodi, jota ei ole vielä otettu käyttöön Suomessa. Katso tätä standardia vastaava ensimmäisen sukupolven standardi. Lisätietoja eurokoodeista www.eurocodes.fi.