Lyhenteet

- A / A +

Takaisin

SFS-EN 1996-1-2:2024:en

Eurocode 6. Design of masonry structures. Part 1-2: Structural fire design

Tuote ladattavissa heti Toimitusaika on noin 1 - 2 työpäivää Toimitusaika on 3 - 5 työpäivää.
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.

1.1 Scope of prEN 1996-1-2
(1) This document gives rules for the design of masonry structures for the accidental situation of fire exposure. This document only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to structures, or parts of structures, that are within the scope of EN 1996-1-1 or EN 1996-3 and are designed accordingly.
(3) This document gives rules for the design of structures for specified requirements in respect of the aforementioned functions and the levels of performance.
(5) This document does not cover masonry built with natural stone units according to EN 771-6.
(6) This document deals with:
- non-loadbearing internal walls;
- non-loadbearing external walls;
- loadbearing internal walls with separating or non-separating functions;
- loadbearing external walls with separating or non-separating functions.
1.2 Assumptions
(1) The assumptions of EN 1990 and EN 1996-1-1 apply to this document.
(2) This document is intended to be used together with EN 1990, EN 1991-1-2, EN 1996-1-1, EN 1996 2 and EN 1996-3.
(3) In addition to the general assumptions of EN 1990 and EN 1996-1-1, the following assumptions apply:
- the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
- any fire protection measure taken into account in the design will be adequately maintained.

Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
Sidokset
Velvoittavat viittaukset
EN 1363-2:1999 Fire resistance tests - Part 2: Alternative and additional procedures
EN 1364-1:2015 Fire resistance tests for non-loadbearing elements - Part 1: Walls
EN 1366-4:2021 Fire resistance tests for service installations - Part 4: Linear joint seals
Näytä julkaisuun liittyvät velvoittavat viittaukset
Direktiivi
305/2011 Rakennustuotteet

http://ec.europa.eu »
Vahvistuspäivä
04.10.2024
Julkaisupäivä
08.10.2024
Painos
2
Sivumäärä
76
Julkaisun kieli
englanti
Lisätiedot
Tämä on nk. toisen sukupolven eurokoodi, jota ei ole vielä otettu käyttöön Suomessa. Katso tätä standardia vastaava ensimmäisen sukupolven standardi. Lisätietoja eurokoodeista www.eurocodes.fi.

Takaisin