SFS-EN 17339:2024:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This document specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of composite gas cylinders and tubes for compressed hydrogen.
NOTE 1 Unless specified in the text, for the purposes of this document, the word “cylinder” includes tubes.
This document applies to
- fully wrapped composite cylinders (Type 3 and Type 4)
- hoop wrapped cylinders (Type 2)
with carbon fibres intended to be permanently mounted in a frame (e.g. bundle or trailer) with a test pressure of not less than 300 bar, with:
— non-metallic liners (for Type 4) or seamless metallic liners (for Type 2 and Type 3),
— a maximum water capacity of 3 000 l
— a maximum working pressure of 1 000 bar.
— the product of working pressure times water capacity (p x V) not exceeding 1 000 000 bar.l.
NOTE 2 A glass fibre protective layer is sometimes applied to the external surface of the cylinder

Tämän julkaisun valmistelusta Suomessa vastaa Kemesta ry, puh. 040 820 4888.

Tuoteryhmä(t)

23.020.35 Kaasupullot »

Sidokset

Velvoittavat viittaukset

ASTM D 2196:2010 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D 2344/D 2344M:2013 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 4018:2011 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows

Näytä julkaisuun liittyvät velvoittavat viittaukset

ASTM D 2196:2010 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D 2344/D 2344M:2013 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 4018:2011 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
EN 13807:2017 Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
EN ISO 10961:2019 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019)
EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
EN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2021)
EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
EN ISO 11120:2015 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015)
EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019)
EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
EN ISO 13341:2010 Gas cylinders - Fitting of valves to gas cylinders (ISO 13341:2010)
EN ISO 13769:2018 Gas cylinders - Stamp marking (ISO 13769:2018)
EN ISO 14130:1997 Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997)
EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010)
EN ISO 2884-1:2024 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates (ISO 2884-1:2024)
EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)
EN ISO 527-1:2019 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 527-2:2025 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2025)
EN ISO 75-1:2020 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates (ISO 75-3:2004)
EN ISO 7866:2012 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012)
EN ISO 9809-1:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa (ISO 9809-1:2019)
EN ISO 9809-2:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2019)
EN ISO 9809-4:2022 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa (ISO 9809-4:2021)
ISO 10618:2004 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
ISO 6721-11:2019 Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature

Piiloita näkyvistä julkaisuun liittyvät velvoittavat viittaukset

Tekninen komitea

CEN/TC 23 Transportable gas cylinders »

Direktiivi

2008/68/EC Vaarallisten aineiden sisämaankuljetuksista

http://ec.europa.eu »

Vahvistuspäivä

22.11.2024

Julkaisupäivä

26.11.2024

Painos

2

Sivumäärä

47

Julkaisun kieli

englanti