Verkkokauppa
SFS-EN 1998-2:2025:en
Eurocode 8. Design of structures for earthquake resistance. Part 2: Bridges
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.
EN 1998-2 is intended to be applied to the design of new bridges in seismic regions. It covers the design of reinforced concrete, steel and composite steel-concrete bridges and provides guidance for the design of timber bridges.
EN 1998-2 is applicable to the seismic design of bridges exploiting ductility in structural members or through the use of antiseismic devices. When ductility is exploited, this part primarily covers bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of arched bridges, although its provisions should not be considered as fully covering these cases.
Suspension bridges and masonry bridges, moveable bridges and floating bridges are not included in the scope of EN 1998-2.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 1998-2 is intended to be applied to the design of new bridges in seismic regions. It covers the design of reinforced concrete, steel and composite steel-concrete bridges and provides guidance for the design of timber bridges.
EN 1998-2 is applicable to the seismic design of bridges exploiting ductility in structural members or through the use of antiseismic devices. When ductility is exploited, this part primarily covers bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of arched bridges, although its provisions should not be considered as fully covering these cases.
Suspension bridges and masonry bridges, moveable bridges and floating bridges are not included in the scope of EN 1998-2.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
Tuoteryhmä(t)
Sidokset
Velvoittavat viittaukset
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1998-1-1:2024 Eurocode 8 - Design of structures for earthquake resistance - Part 1-1: General rules and seismic action
EN 1998-5:2024 Eurocode 8 - Design of structures for earthquake resistance - Part 5: Geotechnical aspects, foundations, retaining and underground structures
EN 1998-1-1:2024 Eurocode 8 - Design of structures for earthquake resistance - Part 1-1: General rules and seismic action
EN 1998-5:2024 Eurocode 8 - Design of structures for earthquake resistance - Part 5: Geotechnical aspects, foundations, retaining and underground structures
Vahvistuspäivä
14.03.2025
Julkaisupäivä
18.03.2025
Painos
2
Sivumäärä
87
Julkaisun kieli
englanti
Lisätiedot
Tämä on nk. toisen sukupolven eurokoodi, jota ei ole vielä otettu käyttöön Suomessa. Katso tätä standardia vastaava ensimmäisen sukupolven standardi. Lisätietoja eurokoodeista www.eurocodes.fi.