SFS-EN 1997-3:2025:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

1.1 Scope of FprEN 1997-3
(1) This document provides specific rules to be applied in the design and verification of geotechnical structures.
1.2 Assumptions
(1) This document is intended to be used in conjunction with EN 1990, which establishes principles and requirements for the safety, serviceability, robustness, and durability of structures, including geotechnical structures, and other construction works.
NOTE Additional or amended provisions can be necessary for assessment of existing structures, see prEN 1990-2.
(2) This document is intended to be used in conjunction with EN 1997-1, which provides general rules for the design and verification of geotechnical structures.
(3) This document is intended to be used in conjunction with EN 1997-2, which gives provisions for determining ground properties from ground investigations.
(4) This document is intended to be used in conjunction with the other Eurocodes for the design of geotechnical structures, including temporary geotechnical structures.

Tämän julkaisun valmistelusta Suomessa vastaa Väylä, puh. 0295 343000 (vaihde).

Tuoteryhmä(t)

93.020 Maanrakennuskohteet. Kaivannot. Perustukset. Maanalaiset rakennuskohteet »
91.010.30 Tekniset näkökohdat »
92.207 Geotekninen suunnittelu »

Sidokset

Velvoittavat viittaukset

EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10025-2:2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-3:2019 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10025-2:2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-3:2019 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 10025-4:2019+A1:2022 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10025-5:2019 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10025-6:2019+A1:2022 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10079:2007 Definition of steel products
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 10218-1:2012 Steel wire and wire products - General - Part 1: Test methods
EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
EN 10223-6:2012 Steel wire and wire products for fencing and netting - Part 6: Steel wire chain link fencing
EN 10223-8:2013 Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
EN 10244-2:2023 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
EN 10245-2:2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
EN 10245-3:2011 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
EN 10245-4:2011 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
EN 10245-5:2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
EN 12063:2024 Execution of special geotechnical work - Sheet pile walls, combined pile walls, high modulus walls
EN 12699:2015 Execution of special geotechnical works - Displacement piles
EN 12715:2020 Execution of special geotechnical work - Grouting
EN 12716:2018 Execution of special geotechnical work - Jet grouting
EN 12794:2005+A1:2007 Precast concrete products - Foundation piles
EN 13251:2016 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
EN 13670:2009 Execution of concrete structures
EN 13738:2004 Geotextiles and geotextile-related products - Determination of pullout resistance in soil
EN 14199:2015 Execution of special geotechnical works - Micropiles
EN 14475:2006 Execution of special geotechnical works - Reinforced fill
EN 14487-1:2022 Sprayed concrete - Part 1: Definitions, specifications and conformity
EN 14490:2010 Execution of special geotechnical works - Soil nailing
EN 14679:2005 Execution of special geotechnical works - Deep mixing
EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles
EN 1537:2013 Execution of special geotechnical works - Ground anchors
EN 1538:2010+A1:2015 Execution of special geotechnical work - Diaphragm walls
EN 1563:2018 Founding - Spheroidal graphite cast irons
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1991-2:2023 Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works
EN 1992-1-1:2023 Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
EN 1992-1-2:2023 Eurocode 2 - Design of concrete structures - Part 1-2: Structural fire design
EN 1992-4:2018 Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete
EN 1993-1-10:2025 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-11:2006 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
EN 1993-1-12:2007 Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
EN 1993-1-13:2024 Eurocode 3 - Design of steel structures - Part 1-13: Beams with large web openings
EN 1993-1-1:2022 Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-2:2024 Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1993-1-3:2024 Eurocode 3 - Design of steel structures - Part 1-3: Cold-formed members and sheeting
EN 1993-1-4:2025 Eurocode 3 - Design of steel structures - Part 1-4: Stainless steel structures
EN 1993-1-5:2024 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-6:2007 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-6:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-7:2025 Eurocode 3 - Design of steel structures - Part 1-7: Plate assemblies with elements under transverse loads
EN 1993-1-8:2024 Eurocode 3 - Design of steel structures - Part 1-8: Joints
EN 1993-1-9:2025 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 1993-2:2006 Eurocode 3 - Design of steel structures - Part 2: Steel Bridges
EN 1993-3-1:2006 Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts
EN 1993-3-2:2006 Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys
EN 1993-4-1:2007 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-1:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-2:2007 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-2:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-3:2007 Eurocode 3 - Design of steel structures - Part 4-3: Pipelines
EN 1993-5:2007 Eurocode 3 - Design of steel structures - Part 5: Piling
EN 1993-6:2007 Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures
EN 1994-1-1:2004 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
EN 1994-1-2:2005 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
EN 1994-1-2:2005/A1:2014 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
EN 1994-2:2005 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
EN 1995-1-1:2004 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1995-1-1:2004/A1:2008 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1995-1-1:2004/A2:2014 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1995-1-2:2004 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
EN 1995-2:2004 Eurocode 5: Design of timber structures - Part 2: Bridges
EN 1996-1-1:2022 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-2:2024 Eurocode 6 - Design of masonry structures - Part 1-2: Structural fire design
EN 1996-2:2024 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution
EN 1996-3:2023 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 1997-1:2024 Eurocode 7 - Geotechnical design - Part 1: General rules
EN 1997-2:2024 Eurocode 7 - Geotechnical design - Part 2: Ground properties
EN 206:2013+A2:2021 Concrete - Specification, performance, production and conformity
EN 771-3:2011+A1:2015 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN ISO 10319:2024 Geosynthetics - Wide-width tensile test (ISO 10319:2024)
EN ISO 12957-1:2018 Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1:2018)
EN ISO 12957-2:2024 Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2024)
EN ISO 1461:2022 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2022)
EN ISO 22282-4:2021 Geotechnical investigation and testing - Geohydraulic testing - Part 4: Pumping tests (ISO 22282-4:2021)
EN ISO 22477-10:2016 Geotechnical investigation and testing - Testing of geotechnical structures - Part 10: Testing of piles: rapid load testing (ISO 22477-10:2016)
EN ISO 22477-1:2018 Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Testing of piles: static compression load testing (ISO 22477-1:2018, Corrected version 2019-03)
EN ISO 22477-2:2023 Geotechnical investigation and testing - Testing of geotechnical structures - Part 2: Testing of piles: static tension load testing (ISO 22477-2:2023)
EN ISO 22477-4:2018 Geotechnical investigation and testing - Testing of geotechnical structures - Part 4: Testing of piles: dynamic load testing (ISO 22477-4:2018)
EN ISO 22477-5:2018 Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors (ISO 22477-5:2018)
FprEN 1993-5 Eurocode 3 - Design of steel structures - Part 5: Piling

Tekninen komitea

CEN/TC 250/SC 7 Eurocode 7 - Geotechnical design »

Vahvistuspäivä

28.03.2025

Julkaisupäivä

01.04.2025

Painos

1

Sivumäärä

343

Julkaisun kieli

englanti

Lisätiedot

Tämä on nk. toisen sukupolven eurokoodi, jota ei ole vielä otettu käyttöön Suomessa. Katso tätä standardia vastaava ensimmäisen sukupolven standardi. Lisätietoja eurokoodeista www.eurocodes.fi.