SFS-EN 1995-1-2:2025:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

1.1 Scope of EN 1995-1-2
(1) This document deals with the design of timber structures for the accidental situation of fire exposure and it is intended to be used in conjunction with EN 1995-1-1 and EN 1991-1-2.
This document only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to timber structures required to fulfil a loadbearing function, separating function or both.
(3) This document gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned functions and the levels of performance.
(4) This document applies to structures, or parts of structures, that are within the scope of EN 1995-1-1 and are designed accordingly.
(5) The methods given in this document are applicable to all products covered by European technical product specifications made reference to in this document.
1.2 Assumptions
(1) In addition to the general assumptions of EN 1990, the following assumptions apply:
- the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
- any fire protection measure taken into account in the design will be adequately maintained.

Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).

Tuoteryhmä(t)

91.080.20 Puurakenteet »
13.220.50 Rakennusmateriaalien ja -elementtien palonkesto »
91.010.30 Tekniset näkökohdat »
92.205 Puurakenteiden suunnittelu »

Sidokset

Velvoittavat viittaukset

EN 13162:2012+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
EN 13171:2012+A1:2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
EN 13353:2022 Solid wood panels (SWP) - Requirements

Näytä julkaisuun liittyvät velvoittavat viittaukset

EN 13162:2012+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
EN 13171:2012+A1:2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
EN 13353:2022 Solid wood panels (SWP) - Requirements
EN 1363-1:2020 Fire resistance tests - Part 1: General requirements
EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements
EN 13914-2:2016 Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering
EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements
EN 14081-1:2016+A1:2019 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 14279:2004+A1:2009 Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
EN 14374:2004 Timber structures - Structural laminated veneer lumber - Requirements
EN 14915:2013+A2:2020 Solid wood panelling and cladding - Characteristics, requirements and marking
EN 15101-1:2013+A1:2019 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 15425:2023 Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
EN 16254:2023 Adhesives - Emulsion polymer isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements
EN 16351:2021 Timber structures - Cross laminated timber - Requirements
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1990:2023/FprA1 Eurocode - Basis of structural and geotechnical design - Part 1: New structures
EN 1991-1-1:2025 Eurocode 1 - Actions on structures - Part 1-1: Specific weight of materials, self-weight of construction works and imposed loads for buildings
EN 1991-1-2:2024 Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
EN 1991-1-3:2025 Eurocode 1 - Actions on structures - Part 1-3: Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4:2005/A1:2010 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2025 Eurocode 1 - Actions on structures - Part 1-5: Thermal actions
EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2025 Eurocode 1 - Actions on structures - Part 1-7: Accidental actions
EN 1991-1-9:2025 Eurocode 1 - Actions on structures - Part 1-9: Atmospheric icing
EN 1991-2:2023 Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1992-1-2:2023 Eurocode 2 - Design of concrete structures - Part 1-2: Structural fire design
EN 1993-1-2:2024 Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1995-1-1:2004 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 300:2006 Oriented Strand Boards (OSB) - Definitions, classification and specifications
EN 301:2023 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN 622-2:2004 Fibreboards - Specifications - Part 2: Requirements for hardboards
EN 622-3:2004 Fibreboards - Specifications - Part 3: Requirements for medium boards
EN 622-4:2024 Fibreboards - Specifications - Part 4: Requirements for softboards
EN 622-5:2009 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
EN 636:2012+A1:2015 Plywood - Specifications
EN 998-1:2016 Specification for mortar for masonry - Part 1: Rendering and plastering mortar
ISO 5660-1:2015 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

Piiloita näkyvistä julkaisuun liittyvät velvoittavat viittaukset

Tekninen komitea

CEN/TC 250/SC 5 Eurocode 5: Design of timber structures »

Vahvistuspäivä

26.09.2025

Julkaisupäivä

30.09.2025

Painos

2

Sivumäärä

182

Julkaisun kieli

englanti

Lisätiedot

Tämä on nk. toisen sukupolven eurokoodi, jota ei ole vielä otettu käyttöön Suomessa. Katso tätä standardia vastaava ensimmäisen sukupolven standardi. Lisätietoja eurokoodeista www.eurocodes.fi.