Refuse collection vehicles and associated lifting devices. General requirements and safety requirements. Part 2: Side loaded refuse collection vehicles
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
This European Standard specifies the technical requirements to minimise the hazards listed in Clause 5 which can arise during the operation and the maintenance of side loaded refuse collection vehicles (side loaded RCVs) used for the collection, transportation and unloading of solid wastes and as intended by the manufacturer or his authorised representative. This European Standard deals with: - side loaded refuse collection vehicles as defined in Clauses 3 and 4; - lifting devices for side loaded refuse collection vehicles. Examples for basic types of side loaded refuse collection vehicles are given in Annex B. This European Standard does not establish the additional requirements for: - design and equipment of the chassis, considered as meeting all road traffic requirements; - operation in severe conditions (e.g. extreme environmental conditions such as: temperatures below –10 °C and above +40 °C, corrosive environment, tropical environment); - operation subject to special rules (e.g. potentially explosive atmospheres, contaminating environments); - static electricity problems; - transportation of passengers, lifting of persons; - loading by crane; - loading by a satellite vehicle; - containers other than those manufactured according to EN 840, EN 12574 and EN 13071; - handling of loads the nature of which could lead to dangerous situations (e.g. hot wastes, acids and bases, radioactive materials, especially fragile loads, explosives); - hazards occurring during construction, transportation, commissioning, decommissioning; - hazards occurring in relation to traffic on public roads; - wind velocity in excess of 75 km/h; - direct contact with foodstuffs; - hazards due to the noise of the side loaded RCV.
Tämän julkaisun valmistelusta Suomessa vastaa Palvelualojen työnantajat PALTA ry, puh. 040 579 4393.
EN 1037:1995 Safety of machinery - Prevention of unexpected start-up
EN 1050:1996 Safety of machinery - Principles for risk assessment
EN 1088:1995 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 1037:1995 Safety of machinery - Prevention of unexpected start-up
EN 1050:1996 Safety of machinery - Principles for risk assessment
EN 1088:1995 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
EN 294:1992 Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs
EN 349:1993 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 418:1992 Safety of machinery - Emergency stop equipment, functional aspects - Principles for design
EN 457:1992 Safety of machinery - Auditory danger signals - General requirements, design and testing (ISO 7731:1986, modified)
EN 563:1994 Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces
EN 574:1996 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
EN 60204-1:1997 Koneturvallisuus. Koneiden sähkölaitteisto. Osa 1: Yleiset vaatimukset
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 894-1:1997 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
EN 894-2:1997 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
EN 894-3:2000 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 953:1997 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 954-1:1996 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
EN 982:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003)
EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003)
IEC 60417-DB:2002
ISO 7000:2004 Graphical symbols for use on equipment -- Index and synopsis