SFS-EN 1996-1-1 + A1

Soveltamisala

1.1 Soveltamisala
1.1.1 Eurokoodin 6 soveltamisala
(1)P Eurokoodi 6:a sovelletaan raudoittamattomien, raudoitettujen, esijännitettyjen ja vahvistettujen muurattujen rakenteiden suunnittelussa talonrakennuksessa sekä maa- ja vesirakentamisessa.
(2)P Eurokoodi 6 käsittelee ainoastaan rakenteiden kuormituskestävyys-, käyttökelpoisuus- ja säilyvyysvaatimuksia. Muita, esim. lämmön- tai ääneneristystä koskevia vaatimuksia, ei käsitellä.
(3)P Työnsuoritusta käsitellään siinä laajuudessa kuin on välttämätöntä sen osoittamiseksi, että käytettävien rakennusmateriaalien ja -tuotteiden laatu ja työnsuorituksen taso vastaavat suunnittelussa käytettyjä otaksumia.
(4)P Eurokoodi 6 ei sisällä maanjäristyssuunnittelua koskevia erityisvaatimuksia. Tällaiset vaatimukset esitetään Eurokoodissa 8, joka täydentää ja joka on yhdenmukainen Eurokoodin 6 kanssa.
(5)P Eurokoodissa 6 ei esitetä mitoituksessa huomioon otettavia rakennuksiin sekä maa- ja vesirakennuskohteisiin kohdistuvien kuormien lukuarvoja. Ne esitetään Eurokoodissa 1.

Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).

Tuoteryhmä(t)

91.080.30 Muuratut rakenteet »
92.096 Muurattujen rakenteiden suunnittelu »
91.010.30 Tekniset näkökohdat »

Sidokset

Velvoittavat viittaukset

EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 1015-11:2019 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
EN 1052-1:1998 Methods of test for masonry - Part 1: Determination of compressive strength

EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 1015-11:2019 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
EN 1052-1:1998 Methods of test for masonry - Part 1: Determination of compressive strength
EN 1052-2:2016 Methods of test for masonry - Part 2: Determination of flexural strength
EN 1052-3:2002 Methods of test for masonry - Part 3: Determination of initial shear strength
EN 1052-4:2000 Methods of test for masonry - Part 4: Determination of shear strength including damp proof course
EN 1052-5:2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
EN 1990:2002 Eurocode - Basis of structural design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-3:2003/A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4:2005/A1:2010 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-2:2003 Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1992-1-1:2004 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
EN 1992-1-1:2004/A1:2014 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
EN 1992-1-2:2004 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
EN 1992-1-2:2004/A1:2019 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
EN 1992-2:2005 Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules
EN 1992-3:2006 Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
EN 1992-4:2018 Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete
EN 1993-1-10:2005 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-11:2006 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
EN 1993-1-12:2007 Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
EN 1993-1-1:2005 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-1:2005/A1:2014 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-2:2005 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
EN 1993-1-3:2006 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-1-4:2006 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-4:2006/A1:2015 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-4:2006/A2:2020 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-5:2006 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2006/A1:2017 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2006/A2:2019 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-6:2007 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-6:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-7:2007 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
EN 1993-1-8:2005 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
EN 1993-1-9:2005 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 1993-2:2006 Eurocode 3 - Design of steel structures - Part 2: Steel Bridges
EN 1993-3-1:2006 Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts
EN 1993-3-2:2006 Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys
EN 1993-4-1:2007 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-1:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-2:2007 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-2:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-3:2007 Eurocode 3 - Design of steel structures - Part 4-3: Pipelines
EN 1993-5:2007 Eurocode 3 - Design of steel structures - Part 5: Piling
EN 1993-6:2007 Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures
EN 1994-1-1:2004 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
EN 1994-1-2:2005 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
EN 1994-1-2:2005/A1:2014 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
EN 1994-2:2005 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
EN 1995-1-1:2004 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1995-1-1:2004/A1:2008 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1995-1-1:2004/A2:2014 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1995-1-2:2004 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
EN 1995-2:2004 Eurocode 5: Design of timber structures - Part 2: Bridges
EN 1996-2:2006 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
EN 1997-1:2004 Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-1:2004/A1:2013 Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-2:2007 Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
EN 1999-1-1:2007 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2007/A1:2009 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2007/A2:2013 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-2:2007 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-3:2007 Eurocode 9: Design of aluminium structures – Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2007/A1:2011 Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-4:2007 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2007/A1:2011 Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-5:2007 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 206:2013+A2:2021 Concrete - Specification, performance, production and conformity
EN 771-1:2011+A1:2015 Specification for masonry units - Part 1: Clay masonry units
EN 771-2:2011+A1:2015 Specification for masonry units - Part 2: Calcium silicate masonry units
EN 771-3:2011+A1:2015 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN 771-4:2011+A1:2015 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
EN 771-5:2011+A1:2015 Specification for masonry units - Part 5: Manufactured stone masonry units
EN 771-6:2011+A1:2015 Specification for masonry units - Part 6: Natural stone masonry units
EN 772-1:2011+A1:2015 Methods of test for masonry units - Part 1: Determination of compressive strength
EN 845-1:2013+A1:2016 Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
EN 845-2:2013+A1:2016 Specification for ancillary components for masonry - Part 2: Lintels
EN 845-3:2013+A1:2016 Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
EN 846-2:2000 Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
EN 998-1:2016 Specification for mortar for masonry - Part 1: Rendering and plastering mortar
EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar
FprEN 10138-1 Prestressing steels - Part 1: General requirements
FprEN 10138-2 Prestressing steels - Part 2: Wire
FprEN 10138-3 Prestressing steels - Part 3: Strand
FprEN 10138-4 Prestressing steels - Part 4: Bar
prEN 10348-1 Steel for the reinforcement of concrete - Galvanized reinforcing steel - Part 1: General

Tekninen komitea

CEN/TC 250/SC 6 Eurocode 6: Design of masonry structures »

Direktiivi

89/106/EEC Rakennustuotedirektiivi
305/2011 Rakennustuotteet

http://ec.europa.eu »

Vahvistuspäivä

12.08.2013

Julkaisupäivä

04.10.2013

Painos

2

Sivumäärä

102

Julkaisun kieli

suomi

Lisätiedot

Tätä versiota standardista voidaan käyttää 2028-03-30 saakka.

Tämä on nk. ensimmäisen sukupolven eurokoodi, joka on edelleen käytössä Suomessa, kunnes toisen sukupolven eurokoodit otetaan käyttöön. Lisätietoja eurokoodeista www.eurocodes.fi.