SFS-EN 10162

Soveltamisala

1 Soveltamisala
Tässä eurooppalaisessa standardissa esitetään rullamuovaamalla valmistettujen teräsprofiilien mitta- ja muototoleranssit.
Standardi koskee standardien EN 10025, EN 10142 ja EN 10147 mukaisista teräksistä rullamuovattuja yleiseen käyttöön tarkoitettuja suorakulmaisia L-, U-, C-, Z- ja Omega-muotoisia teräsprofiileja (vakioprofiileja) ja halkaistuja putkia (ks. kuvat 1…6).
Standardi koskee myös kohdassa 5 mainituista teräksistä rullamuovattuja erikoiskäyttökohteisiin tarkoitettuja teräsprofiileja (erikoisprofiilit), joilla on muu taivutussäde, toleranssit ja muoto.
HUOM. Rakennusten teräsrungoissa, ovien karmeissa, varastohyllyissä, autoissa ja silloissa käytettävät profiilit ovat esimerkkejä erikoisprofiileista (ks. kuvat 7 ja 8).
Tämä eurooppalainen standardi ei koske vedettyjä, puristettuja tai taivutettuja profiileja, paalutuslevyjä tai muiden standardien mukaan valmistettuja profiileja.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

77.140.70 Teräsprofiilit »

Sidokset

Velvoittavat viittaukset

EN 10020:2000 Definition and classification of grades of steel
EN 10021:1993 General technical delivery requirements for steel and iron products
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions

EN 10020:2000 Definition and classification of grades of steel
EN 10021:1993 General technical delivery requirements for steel and iron products
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10025-2:2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-3:2019 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 10025-4:2019 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10025-4:2019+A1 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10025-4:2019+A1:2022 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10051:2024 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10079:1992 Definition of steel products
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
EN 10088-1:2023 Stainless steels - Part 1: List of stainless steels
EN 10088-2:2014 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
EN 10130:2006 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
EN 10131:2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10139:2016+A1:2020 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
EN 10140:2006 Cold rolled narrow steel strip - Tolerances on dimensions and shape
EN 10143:2006 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 10169:2022 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 10204:1991 Metallic products - Types of inspection documents
EN 10268:2006+A1:2013 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
EN 606:2004 Bar coding - Transport and handling labels for steel products
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 377:1997 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
EN ISO 9445-2:2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)

Tekninen komitea

CEN/TC 459/SC 9 Coated and uncoated flat products to be used for cold forming »

Vahvistuspäivä

20.10.2003

Julkaisupäivä

16.01.2004

Painos

1

Sivumäärä

40

Julkaisun kieli

suomi/englanti