Tässä eurooppalaisessa standardissa määritellään kanavien rakentamisessa käytettävien geotekstiilien ja vastaavien tuotteiden ominaisuudet ja tarvittavat testausmenetelmät. Geotekstiilien tai vastaavien tuotteiden aiottu käyttötarkoitus on täyttää yksi tai useampia seuraavista tehtävistä: suodattaminen, erottaminen, lujittaminen ja suojaaminen. Erottamistehtävää käytetään aina yhdessä suodattamisen tai lujittamisen kanssa, joten erottamistehtävää ei määritellä koskaan yksinään. Tämä eurooppalainen standardi ei koske standardissa EN ISO 10318‑1 määriteltyjä geoeristeitä. Tässä eurooppalaisessa standardissa esitetään tämän eurooppalaisen standardin mukaisen tuotteen suoritustason pysyvyyden arviointi ja varmentaminen (AVCP) ja tehtaan sisäiset laadunvalvontamenettelyt. Tietyt sovellustapaukset voivat sisältää lisäominaisuuksia ja (mieluiten standardoituja) testausmenetelmiä koskevia vaatimuksia, mikäli ne ovat teknisesti perusteltuja. Tätä eurooppalaista standardia voidaan käyttää suunnitteluarvojen johtamiseen käyttämällä standardissa EN 1997-1 (eurokoodi 7) esitettyjen määritelmien yhteydessä esitettyjä kertoimia, kuten varmuuslukuja. Tuotteen suunniteltu käyttöikä olisi määritettävä, koska sen tehtävä saattaa olla väliaikainen, esimerkiksi rakentamisen ajalle suunniteltu, tai pysyvä, koko rakenteen käyttöiän ajaksi tarkoitettu.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
Sisällysluettelo
Eurooppalainen esipuhe
Johdanto
1 Soveltamisala
2 Velvoittavat viittaukset
3 Termit, määritelmät ja lyhenteet
3.1 Termit ja määritelmät
3.2 Lyhenteet
4 Edellytetyt ominaisuudet ja vastaavat testimenetelmät
4.1 Yleistä
4.2 Käyttösovellukseen sopivan standardin valinta
4.3 Määriteltyjä käyttöolosuhteita koskevat ominaisuudet
4.4 Vaarallisten aineiden vapautuminen
5 Suoritustason pysyvyyden arviointi ja varmentaminen (AVCP)
5.1 Yleistä
5.2 Ominaisuuksien esittely
5.3 Tuotetyypin määritys
5.4 Tehtaan sisäinen laadunvalvonta
5.5 Arvojen todentaminen
5.6 Tehtaan ja sen sisäisen laadunvalvonnan alkutarkastus
5.7 Tehtaan sisäisen laadunvalvonnan jatkuva valvonta
6 Merkintä
Liite A Tehtaan sisäinen laadunvalvonta (velvoittava)
Liite B Säilyvyys (velvoittava)
Liite C Oikean standardin valintaa koskevia ohjeita (opastava)
Liite D Merkittävät tekniset muutokset standardin edellisiin painoksiin nähden (opastava)
Liite ZA Tämän eurooppalaisen standardin kohdat, jotka liittyvät EU:n rakennustuoteasetukseen (opastava)
ASTM D 4603:2003 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
ASTM D 7409:2015 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
EN 12224:2000 Geotextiles and geotextile-related products - Determination of the resistance to weathering
ASTM D 4603:2003 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
ASTM D 7409:2015 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
EN 12224:2000 Geotextiles and geotextile-related products - Determination of the resistance to weathering
EN 12226:2012 Geosynthetics - General tests for evaluation following durability testing
EN 12447:2001 Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water
EN 12447:2021 Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water
EN 13719:2016 Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
EN 14574:2015 Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
EN ISO 10318-1:2015 Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015)
EN ISO 10319:2015 Geosynthetics - Wide-width tensile test (ISO 10319:2015)
EN ISO 10320:2019 Geosynthetics - Identification on site (ISO 10320:2019)
EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008)
EN ISO 1043-1:2011 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)
EN ISO 10722:2019 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
EN ISO 11058:2019 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2019)
EN ISO 12236:2006 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
EN ISO 12956:2020 Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2019)
EN ISO 12957-1:2018 Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1:2018)
EN ISO 12957-2:2005 Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005)
EN ISO 13426-1:2019 Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2019)
EN ISO 13426-2:2005 Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005)
EN ISO 13431:1999 Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999)
EN ISO 13433:2006 Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006)
EN ISO 13438:2018 Geosynthetics - Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation (ISO 13438:2018)
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
EN ISO 9862:2023 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2023)
ISO 10390:2005 Soil quality -- Determination of pH