This European Standard specifies the safety requirements of self-propelled variable-reach rough-terrain trucks (hereafter referred to as trucks), intended to handle loads, equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g. carriage and fork arms) is fitted. For the purpose of this standard, rough-terrain variable-reach trucks are designed to transport, lift and place loads and can be driven on unimproved terrain. Fork arms are considered to be part of the truck. Trucks can also be equipped with a variety of attachments (e.g. bale spikes, mowers, sweepers). This European Standard deals with all the significant hazards, hazardous situations and events relevant to the trucks when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This European Standard does not apply to: - slewing variable reach rough terrain trucks covered by EN 1459-2; - industrial variable reach trucks covered by EN ISO 3691-2; - lorry-mounted variable reach trucks; - variable reach trucks fitted with tilting or elevating operator position; - mobile cranes covered by EN 13000; - machines designed primarily for earth moving, even if their buckets and blades are replaced with forks (see EN 474 series); - trucks designed primarily with variable length load suspension elements (e.g. chain, ropes) from which the load may swing freely in all directions; - trucks fitted with personnel/work platforms, designed to move persons to elevated working positions; - trucks designed primarily for container handling; - trucks on tracks; - trucks with articulated chassis; - attachments (covered by prEN 1459-5). This European Standard does not address hazards linked to: - hybrid power systems; - gas power system; - gasoline engine system; - battery power system; - tractor specific devices (e.g. PTO). This European Standard does not address hazards which may occur: a) when handling suspended loads which may swing freely (additional requirements are given in prEN 1459-4 (in preparation)); b) when using trucks on public roads; c) when operating in potentially explosive atmospheres; d) when operating underground; e) when towing trailers; f) when fitted with a personnel work platform (additional requirements are given in EN 1459-3); g) when using cruise-control. This European Standard does not provide a method of calculation for fatigue and strength of material. This document is not applicable to trucks manufactured before the date of its publication.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
ISO 10263-2:2009 Earth-moving machinery -- Operator enclosure environment -- Part 2: Air filter element test method
ISO 10263-3:2009 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method
ISO 10263-4:2009 Earth-moving machinery -- Operator enclosure environment -- Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance
ISO 10263-2:2009 Earth-moving machinery -- Operator enclosure environment -- Part 2: Air filter element test method
ISO 10263-3:2009 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method
ISO 10263-4:2009 Earth-moving machinery -- Operator enclosure environment -- Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance
ISO 11112:1995 Earth-moving machinery -- Operator's seat -- Dimensions and requirements
ISO 11112:1995/Amd 1:2001
ISO 12508:1994 Earth-moving machinery -- Operator station and maintenance areas -- Bluntness of edges
ISO 12509:2004 Earth-moving machinery -- Lighting, signalling and marking lights, and reflex-reflector devices
ISO 13333:1994 Earth-moving machinery -- Dumper body support and operator's cab tilt support devices
ISO 15817:2012 Earth-moving machinery -- Safety requirements for remote operator control systems
ISO 15870:2000 Powered industrial trucks -- Safety signs and hazard pictorials -- General principles
ISO 16528-1:2007 Boilers and pressure vessels -- Part 1: Performance requirements
ISO 16528-2:2007 Boilers and pressure vessels -- Part 2: Procedures for fulfilling the requirements of ISO 16528-1
ISO 21507:2010 Earth-moving machinery -- Performance requirements for non-metallic fuel tanks
ISO 22915-10:2008 Industrial trucks -- Verification of stability -- Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
ISO 22915-14:2010 Industrial trucks -- Verification of stability -- Part 14: Rough-terrain variable-reach trucks
ISO 22915-20:2008 Industrial trucks -- Verification of stability -- Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
ISO 2330:2002 Fork-lift trucks -- Fork arms -- Technical characteristics and testing
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
ISO 6011:2003 Earth-moving machinery -- Visual display of machine operation
ISO 6016:2008 Earth-moving machinery -- Methods of measuring the masses of whole machines, their equipment and components
ISO 6292:2008 Powered industrial trucks and tractors -- Brake performance and component strength
ISO 7000:2014 Graphical symbols for use on equipment -- Registered symbols
ISO 9533:2010 Earth-moving machinery -- Machine-mounted audible travel alarms and forward horns -- Test methods and performance criteria
ISO/DIS 15818:2013 Earth-moving machinery -- Lifting and tying-down attachment points -- Performance requirements
ISO/FDIS 5053-1:2014 Industrial trucks -- Terminology and classification -- Part 1: Types of industrial trucks