SFS-EN 10079

Soveltamisala

Tässä eurooppalaisessa standardissa määritellään terästuotteet seuraavien tekijöiden perusteella:
a) muoto ja mitat sekä
b) ulkonäkö ja pinnan tila.
HUOM. 1 Vaikka tuotteet yleensä luokitellaan riippumatta niiden loppukäyttötarkoituksesta ja valmistustavasta, joissain tapauksissa on tarpeen viitata
myös näihin tekijöihin.
HUOM. 2 Kaikki tässä eurooppalaisessa standardissa esitetyt mitat ovat nimellismittoja.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

01.040.77 Metallurgia (Sanastot) »
77.140.01 Rauta- ja terästuotteet, yleistä »

Sidokset

Velvoittavat viittaukset

EN 10017:2004 Steel rod for drawing and/or cold rolling - Dimensions and tolerances
EN 10024:1995 Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape

EN 10017:2004 Steel rod for drawing and/or cold rolling - Dimensions and tolerances
EN 10024:1995 Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10034:1993 Structural steel I and H sections - Tolerances on shape and dimensions
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10056-1:2017 Structural steel equal and unequal leg angles - Part 1: Dimensions
EN 10058:2018 Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10067:1996 Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 10092-1:2003 Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions
EN 10092-2:2003 Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions
EN 10106:2015 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
EN 10107:2014 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
EN 10107:2022 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
EN 10108:2004 Round steel rod for cold heading and cold extrusion - Dimensions and tolerances
EN 10131:2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10140:2006 Cold rolled narrow steel strip - Tolerances on dimensions and shape
EN 10143:2006 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 10169:2022 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 10202:2001 Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
EN 10202:2022 Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
EN 10205:2016 Cold reduced tinmill products - Blackplate
EN 10210-2:2019 Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10216-2:2013+A1:2019 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10216-4:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 10216-5:2021 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 10217-1:2019 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
EN 10217-2:2019 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-3:2019 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
EN 10217-4:2019 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
EN 10217-5:2019 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-6:2019 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
EN 10217-7:2021 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
EN 10219-2:2019 Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
EN 10248-2:1995 Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 10249-2:1995 Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 10250-1:1999 Open die steel forgings for general engineering purposes - Part 1: General requirements
EN 10250-1:2022 Open die steel forgings for general engineering purposes - Part 1: General requirements
EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
EN 10265:1995 Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
EN 10278:1999 Dimensions and tolerances of bright steel products
EN 10278:2023 Dimensions and tolerances of bright steel products of stainless and other special steels
EN 10279:2000 Hot rolled steel channels - Tolerances on shape, dimensions and mass
EN 10294-1:2005 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels
EN 10296-1:2003 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10296-2:2005 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10297-2:2005 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
EN 10303:2015 Thin magnetic steel strip and sheet for use at medium frequencies
EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 10305-3:2023 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
EN 10341:2006 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
EN 39:2001 Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions
EN ISO 1127:1996 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
EN ISO 3183:2019 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019)
FprEN 10138-2 Prestressing steels - Part 2: Wire
FprEN 10138-4 Prestressing steels - Part 4: Bar

Tekninen komitea

CEN/TC 459/SC 12 General issues »

Vahvistuspäivä

20.08.2007

Julkaisupäivä

25.03.2008

Painos

2

Sivumäärä

81

Julkaisun kieli

suomi/englanti