This document specifies the requirements and test methods for temporary edge protection systems for use during construction or maintenance of buildings and other structures. This document applies to edge protection systems for flat and inclined surfaces and specifies the requirements for three classes of temporary edge protection. For edge protection systems with an arrest function (e.g. falling or sliding down a sloping roof) this standard specifies requirements for energy absorption. This standard includes edge protection systems, some of which are fixed to the structure and others, which rely on gravity and friction on flat surfaces. This standard does not provide requirements for edge protection systems intended for: - protection against impact from vehicles or from other mobile equipment, - protection from sliding down of bulk loose materials, snow etc, - protection of areas accessible to the public. This standard does not apply to side protection on scaffolds according to EN 12811-1 and EN 1004. NOTE This does not prevent these systems to be used on temporary structures.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
EN 1263-1:2014 Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
EN 12811-3:2002 Temporary works equipment - Part 3: Load testing
EN 1990:2002 Eurocode - Basis of structural design
EN 1263-1:2014 Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
EN 12811-3:2002 Temporary works equipment - Part 3: Load testing
EN 1990:2002 Eurocode - Basis of structural design
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1993-1-10:2005 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-11:2006 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
EN 1993-1-12:2007 Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
EN 1993-1-1:2005 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-1:2022 Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-2:2005 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
EN 1993-1-2:2024 Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1993-1-3:2006 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-1-3:2024 Eurocode 3 - Design of steel structures - Part 1-3: Cold-formed members and sheeting
EN 1993-1-4:2006 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-5:2006 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2024 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-6:2007 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-7:2007 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
EN 1993-1-8:2005 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
EN 1993-1-8:2024 Eurocode 3 - Design of steel structures - Part 1-8: Joints
EN 1993-1-9:2005 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 1993-2:2006 Eurocode 3 - Design of steel structures - Part 2: Steel Bridges
EN 1993-3-1:2006 Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts
EN 1993-3-2:2006 Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys
EN 1993-4-1:2007 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-2:2007 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-3:2007 Eurocode 3 - Design of steel structures - Part 4-3: Pipelines
EN 1993-5:2007 Eurocode 3 - Design of steel structures - Part 5: Piling
EN 1993-6:2007 Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures
EN 1995-1-1:2004 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1995-1-2:2004 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
EN 1995-2:2004 Eurocode 5: Design of timber structures - Part 2: Bridges
EN 1999-1-1:2007 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2023 Eurocode 9 - Design of aluminium structures - Part 1-1: General rules
EN 1999-1-2:2007 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-2:2023 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-3:2007 Eurocode 9: Design of aluminium structures – Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2023 Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-4:2007 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2023 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-5:2007 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 1999-1-5:2023 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 338:2016 Structural timber - Strength classes
EN 596:1995 Timber structures - Test methods - Soft body impact test of timber framed walls
EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
EN 74-1:2022 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
EN 74-2:2022 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
EN 74-3:2007 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures