Verkkokauppa
SFS-EN 14316-1:en
Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products. Part 1: Specification for bonded and loose-fill products before installation
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.
This European Standard specifies the requirements for expanded perlite products for in-situ installation in roofs, ceilings, walls and floors.
This Part 1 of the standard is a specification for the insulation products before installation covering the five product types, Perlite Aggregate (EPA), Coated Perlite (EPC), Bitumen Coated Perlite (EPB), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM).
Part 1 of this European Standard describes the product characteristics and includes procedures for testing, evalua-tion of conformity, marking and labelling.
This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.
This European Standard does not cover factory made insulation products of formed shapes and boards made with expanded perlite.
The products covered by this standard are not intended to be used primarily for airborne sound insulation or sound absorption applications although they may improve the performance of the buildings in these respects when installed for their primary thermal insulation intended use.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
This European Standard specifies the requirements for expanded perlite products for in-situ installation in roofs, ceilings, walls and floors.
This Part 1 of the standard is a specification for the insulation products before installation covering the five product types, Perlite Aggregate (EPA), Coated Perlite (EPC), Bitumen Coated Perlite (EPB), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM).
Part 1 of this European Standard describes the product characteristics and includes procedures for testing, evalua-tion of conformity, marking and labelling.
This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.
This European Standard does not cover factory made insulation products of formed shapes and boards made with expanded perlite.
The products covered by this standard are not intended to be used primarily for airborne sound insulation or sound absorption applications although they may improve the performance of the buildings in these respects when installed for their primary thermal insulation intended use.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
Tuoteryhmä(t)
Sidokset
Velvoittavat viittaukset
EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 13055:2016 Lightweight aggregates
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 13055:2016 Lightweight aggregates
Tekninen komitea
Direktiivi
Vahvistuspäivä
18.10.2004
Julkaisupäivä
05.11.2004
Painos
1
Sivumäärä
27
Julkaisun kieli
englanti
Lisätiedot
Varmista hEN Helpdeskistä, onko standardin tämä versio CE-merkintään voimassa oleva versio.