This document is applicable to inflatable play equipment intended for use by children fourteen years and under both individually and collectively. This document specifies safety requirements for inflatable play equipment for which the primary activities are bouncing and sliding. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of inflatable play equipment. It specifies information to be supplied with the equipment. The requirements have been laid down bearing in mind the risk factor based on available data. This document specifies the requirements that will protect a child from hazards that he or she may be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated. This document is not applicable to inflatable water-borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not bouncing or sliding.
Tämän julkaisun valmistelusta Suomessa vastaa Palvelualojen työnantajat PALTA ry, puh. 040 579 4393.
EN 1177:2018+A1:2023 Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
EN 1177:2018+AC:2019 Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 1177:2018+A1:2023 Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
EN 1177:2018+AC:2019 Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 71-3:2019+A1 Safety of toys - Part 3: Migration of certain elements
EN 71-3:2019+A1:2021 Safety of toys - Part 3: Migration of certain elements
EN 71-3:2019+A2 Safety of toys - Part 3: Migration of certain elements
EN 71-3:2019+A2:2024 Safety of toys - Part 3: Migration of certain elements
EN ISO 1421:2016 Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016)
EN ISO 2307:2019 Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2019)
EN ISO 2411:2017 Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017)
EN ISO 2411:2024 Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2023)
EN ISO 9554:2019 Fibre ropes - General specifications (ISO 9554:2019)
EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)