SFS-EN 17533:2020:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This International Standard specifies the requirements for design, manufacture and testing of cylinders, tubes, and other pressure vessels of steel, stainless steel, aluminium alloys or of non-metallic construction material intended for the stationary storage of gaseous hydrogen of up to a maximum water capacity of 10 000 l and a maximum allowable working pressure not exceeding 110 MPa, of seamless metallic construction (Type 1) or of composite construction (Types 2, 3 and 4) without any non-seamless load sharing metallic components, hereafter referred to as pressure vessels.
For Existing design already qualified for other applications (e.g. transportable applications) follow the requirements of Annex E.
This International Standard is not intended as a specification for pressure vessels used for solid, liquid hydrogen or hybrid cryogenic-high pressure hydrogen storage applications.

Tämän julkaisun valmistelusta Suomessa vastaa Kemesta ry, puh. 040 820 4888.

Tuoteryhmä(t)

71.100.20 Teollisuuskäyttöön tarkoitetut kaasut »
23.020.30 Painelaitteet »

Sidokset

Velvoittavat viittaukset

ASTM D 3170/D 3170M:2014 Standard Test Method for Chipping Resistance of Coatings
ASTM E 647:2015 Standard Test Method for Measurement of Fatigue Crack Growth Rates
EN 13322-2:2003 Transportable gas cylinders - Reffilable welded steel gas cylinders - Design and construction - Part 2: Stainless steel

ASTM D 3170/D 3170M:2014 Standard Test Method for Chipping Resistance of Coatings
ASTM E 647:2015 Standard Test Method for Measurement of Fatigue Crack Growth Rates
EN 13322-2:2003 Transportable gas cylinders - Reffilable welded steel gas cylinders - Design and construction - Part 2: Stainless steel
EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013)
EN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2021)
EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
EN ISO 11120:2015 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015)
EN ISO 11357-2:2020 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020)
EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013)
EN ISO 14130:1997 Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997)
EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
EN ISO 16474-1:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013)
EN ISO 16474-3:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
EN ISO 2808:2019 Paints and varnishes - Determination of film thickness (ISO 2808:2019)
EN ISO 2812-1:2017 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
EN ISO 4624:2023 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
EN ISO 7225:2007 Gas cylinders - Precautionary labels (ISO 7225:2005)
EN ISO 7866:2012 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012)
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN ISO 9227:2022 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2022)
EN ISO 9809-1:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa (ISO 9809-1:2019)
EN ISO 9809-2:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2019)
EN ISO 9809-3:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 3: Normalized steel cylinders and tubes (ISO 9809-3:2019)
ISO 11119-1:2012 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
ISO 11119-2:2012 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
ISO 11119-3:2013 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners
ISO 12108:2018 Metallic materials -- Fatigue testing -- Fatigue crack growth method
ISO 9809-4:2014 Gas cylinders -- Refillable seamless steel gas cylinders -- Design, construction and testing -- Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa

Tekninen komitea

CEN/TC 23 Transportable gas cylinders »

Vahvistuspäivä

12.06.2020

Julkaisupäivä

16.06.2020

Painos

1

Sivumäärä

79

Julkaisun kieli

englanti