SFS-EN 17232:2020

Soveltamisala

Tässä asiakirjassa määritellään turvallisuusvaatimukset, testimenetelmät ja toiminnalliset vaatimukset asennetuille vesileikkivälineille ja -rakenteille sekä vesiefekteille:
– jotka on tarkoitettu leikkimistä varten
– jotka ovat yleisessä käytössä (ei kotikäytössä) olevia vesiaktiviteetteja ja jotka yleensä liittyvät uima-allasympäristöön
– joissa vesi on olennainen osa leikkivälineen tai -rakenteen tai vesiefektin käyttöä leikkitarkoituksissa.
Tätä asiakirjaa sovelletaan myös vesisuihkupuistoihin (spray park).
Tätä asiakirjaa ei sovelleta
a) standardin EN ISO 25649 mukaisiin veden päällä ja vedessä käytettäviin kelluviin vapaa-ajan tuotteisiin
b) standardin EN 12572 mukaisiin kiipeilyrakenteisiin
c) standardin EN 71 mukaisiin leluihin
d) standardin EN 1069 mukaisiin vesiliukumäkiin
e) standardin EN 17164 mukaisiin uima-altaiden yhteyteen asennettaviin kiipeilyseiniin
f) vesileikkivälineisiin tai -efekteihin (esim. koristesuihkulähteisiin), joita ei ole tarkoitettu leikkimiseen
g) kotikäytössä oleviin uima-altaisiin asennettuihin vesileikkivälineisiin tai- efekteihin
h) standardin EN 1176 mukaisiin leikkikenttävälineisiin.

Tämän julkaisun valmistelusta Suomessa vastaa Yhteinen Toimialaliitto, www.ytl.fi.

Sisällysluettelo

Tuoteryhmä(t)

97.220.40 Ulko- ja vesiurheiluvälineet »

Sidokset

Velvoittavat viittaukset

EN 1069-1:2017+A1:2019 Water slides - Part 1: Safety requirements and test methods
EN 1069-2:2017 Water slides - Part 2: Instructions
EN 1176-10:2008 Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment

EN 1069-1:2017+A1:2019 Water slides - Part 1: Safety requirements and test methods
EN 1069-2:2017 Water slides - Part 2: Instructions
EN 1176-10:2008 Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
EN 1176-10:2023 Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
EN 1176-11:2014 Playground equipment and surfacing - Part 11: Additional specific safety requirements and test methods for spatial network
EN 1176-1:2017 Playground equipment and surfacing - Part 1: General safety requirements and test methods
EN 1176-1:2017+A1 Playground equipment and surfacing - Part 1: General safety requirements and test methods
EN 1176-1:2017+A1:2023 Playground equipment and surfacing - Part 1: General safety requirements and test methods
EN 1176-2:1998 Playground equipment - Part 2: Additional specific safety requirements and test methods for swings
EN 1176-2:1998/A1:2003 Playground equipment - Part 2: Additional specific safety requirements and test methods for swings
EN 1176-2:2008 Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
EN 1176-2:2017 Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
EN 1176-2:2017+AC:2019 Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
EN 1176-3:2017 Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides
EN 1176-4:1998 Playground equipment - Part 4: Additional specific safety requirements and test methods for runways
EN 1176-4:1998/A1:2003 Playground equipment - Part 4: Additional specific safety requirements and test methods for runways
EN 1176-4:2008 Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways
EN 1176-4:2017 Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways
EN 1176-4:2017+AC:2019 Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways
EN 1176-5:2019 Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels
EN 1176-6:1998 Playground equipment - Part 6: Additional specific safety requirements and test methods for rocking equipment
EN 1176-6:1998/A1:2002 Equipements d'aires de jeux - Partie 6: Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux équipements oscillants
EN 1176-6:2008 Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
EN 1176-6:2017 Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
EN 1176-6:2017+AC:2019 Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
EN 1176-7:2020 Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation
EN 1177:2018+A1:2023 Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
EN 1177:2018+AC:2019 Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
EN 13451-10:2018 Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
EN 13451-11:2014 Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
EN 13451-11:2022 Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads installed in pools for public use
EN 13451-1:2020 Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use
EN 13451-2:2015+A1:2019 Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends
EN 13451-2:2015+A1:2020 Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends
EN 13451-3:2011+A3:2016 Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
EN 13451-3:2022 Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use
EN 13451-4:2014 Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms
EN 13451-5:2014 Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines and dividing line
EN 13451-6:2001 Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards
EN 13451-7:2001 Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals
EN 15288-1:2018 Swimming pools for public use - Part 1: Safety requirements for design
EN 15288-2:2018 Swimming pools for public use - Part 2: Safety requirements for operation
EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
EN ISO 15607:2019 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019)
EN ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005)
EN ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
EN ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005)
EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
EN ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)
EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
EN ISO 3834-5:2015 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015)
EN ISO 3834-5:2021 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
EN ISO 3834-6:2024 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024)
HD 60364-7-702:2010 Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains
ISO 20712-3:2014 Water safety signs and beach safety flags -- Part 3: Guidance for use
ISO 22727:2007 Graphical symbols -- Creation and design of public information symbols -- Requirements
ISO 3864-1:2011 Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs and safety markings
ISO 3864-3:2012 Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols for use in safety signs
ISO 7001:2007 Graphical symbols -- Public information symbols
ISO 7010:2019 Graphical symbols -- Safety colours and safety signs -- Registered safety signs

Tekninen komitea

CEN/TC 136 Sports, playground and other recreational facilities and equipment »

Vahvistuspäivä

03.04.2020

Julkaisupäivä

22.09.2020

Painos

1

Sivumäärä

58

Julkaisun kieli

suomi/englanti