SFS-EN 1993-1-10:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This prEN contains design rules for selecting and specifying steel materials that are resistant to failure by brittle fracture and lamellar tearing. Brittle fracture is characterized as failure of a structural element without significant plastic deformation. Lamellar tearing is characterized as failure of parent metal by delamination along planes of segregation in its microstructure as a result of excessive through-thickness strain.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

91.080.10 Metallirakenteet »
92.093 Teräsrakenteiden suunnittelu »
91.080.13 Teräsrakenteet »
91.010.30 Tekniset näkökohdat »

Sidokset

Velvoittavat viittaukset

EN 1011-2:2001 Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10164:2018 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions

EN 1011-2:2001 Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10164:2018 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1090-2:2018 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1:2024 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-3:2019 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 1990:2002 Eurocode - Basis of structural design
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1998-1:2004 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
EN ISO 6892-2:2018 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)
EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
EN ISO 9513:2012 Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012)

Tekninen komitea

CEN/TC 250/SC 3 Eurocode 3 - Design of steel structures »

Direktiivi

89/106/EEC Rakennustuotedirektiivi
305/2011 Rakennustuotteet

http://ec.europa.eu »

Vahvistuspäivä

15.08.2005

Julkaisupäivä

02.09.2005

Painos

1

Sivumäärä

19

Julkaisun kieli

englanti

Lisätiedot

Tämä on nk. ensimmäisen sukupolven eurokoodi, joka on edelleen käytössä Suomessa, kunnes toisen sukupolven eurokoodit otetaan käyttöön. Lisätietoja eurokoodeista www.eurocodes.fi.